J Dent Rehabil Appl Sci.  2019 Jun;35(2):81-89. 10.14368/jdras.2019.35.2.81.

Effects of fluoride release and solubility of resin modified glass ionomer with surface coating agents

• Yoon T
• Yoo S

• KMID: 2451755
• DOI: http://doi.org/10.14368/jdras.2019.35.2.81

Abstract

PURPOSE
This study aimed to investigate the correlation between the solubility and the amount of fluoride release when a resin surface coating agent is applied to RMGIC.
MATERIALS AND METHODS
To measure the fluoride release and solubility, Fuji II LC®and Filtekâ„¢ Z350XT without a surface coating, Fuji II LC® with G coat plusâ„¢ and Fuji II LC® with Permaseal® were prepared. And the amount of fluoride release and solubility were measured.
RESULTS
There was no significant difference in the daily fluoride release between the surface coating agents. The cumulative fluoride release was significantly different between the groups using RMGIC at 56 days (P < 0.05). In the solubility measurement, RMGIC without surface coating was significantly different only on the 7th day compared to the other three groups (P < 0.05).
CONCLUSION
Surface coating agents can prevent the degradation of properties by the initial solvent in RMGIC. Therefore, fluoride is preserved inside the restorative material and the effect of surface coating after the addition is reduced, so that the effect on fluoride release and storage is also reduced.

Keyword

surface coating agent; resin modified glass ionomer; fluoride release; solubility

MeSH Terms

Fluorides*
Glass*
Solubility*
Fluorides

Figure

• 

  Fig. 1 Daily fluoride release for 56 days. Kruskal-wallis test and Scheffe post hoc test (* : P < 0.05).

• 

  Fig. 2 Cumulative fluoride release for 56 days. Kruskal-wallis test and Scheffe post hoc test (* : P < 0.05).

• 

  Fig. 3 Solubility of experimental materials for 56 days. Kruskal-wallis test and Scheffe post hoc test (* : P < 0.05).

Reference

References

1. Moses J, Rangeeth BN, Gurunathan D. Prevalence of dental caries, socio-economic status and treatment needs among 5 to 15 year old school going children of Chidambaram. JCDR. 2011; 5:146–51.

2. Kramer N, Schmidt M, Lucker S, Domann E, Frankenberger R. Glass ionomer cement inhibits secondary caries in an in vitro biofilm model. Clin Oral Ivestig. 2018; 22:1019–31. DOI: 10.1007/s00784-017-2184-1. PMID: 28741172.

3. Croll TP, Nicholson JW. Glass ionomer cement in pediatric dentistry:review of the literature. Pediatr Dent. 2002; 24:423–9. PMID: 12412956.

4. Khoroushi M, Keshani F. A review of glass-ionomers:From conventional glass-ionomer to bioactive glass-ionomer. Dent Res J. 2013; 10:411–20. PMID: 24130573. PMCID: PMC3793401.

5. Haznedaroğlu E, Guner Ş, Duman C, Menteş A. A 48-month randomized controlled trial of caries prevention effect of a one-time application of glass ionomer sealant versus resin sealant. Dent Mater J. 2016; 35:532–8. PMID: 27086573. DOI: 10.4012/dmj.2016-084.

6. Itota T, Nakabo S, Iwai Y, Konishi N, Nagamine M, Torii Y. Inhibition of artificial secondary caries by fluoride-releasing adhesives on root dentin. J Oral Rehabil. 2002; 29:523–7. DOI: 10.1046/j.1365-2842.2002.00858.x. PMID: 12071919.

7. Berzins DW, Abey S, Costache MC, Wilkie CA, Roberts HW. Resin modified glass-ionomer setting reaction competition. J Dent Res. 2010; 89:82–6. DOI: 10.1177/0022034509355919. PMID: 19966038. PMCID: PMCPMC3318046.

8. Karaoğlanoğlu S, Akgul N, Ozdabak HN, Akgul HM. Effectiveness of surface protection for glass-ionomer, resin modified glass ionomer and polyacid-modified composite resins. Dent Mater J. 2009; 28:96–101. DOI: 10.4012/dmj.28.96. PMID: 19280974.

9. Kamatham R, Reddy SJ. Surface coatings on glass ionomer restorations in Pediatric dentistry - Worthy or not? J Indian Soc Pedod Prev Dent. 2013; 31:229–33. DOI: 10.4103/0970-4388.121818. PMID: 24262395.

10. Soderholm KJ. Coatings in dentistry - a review of some basic principles. Coatings. 2012; 2:138–59. DOI: 10.3390/coatings2030138.

11. Hattab FN, Amin WM. Fluoride release from glass ionomer restorative materials and the effects of surface coating. Biomaterials. 2001; 22:1449–58. DOI: 10.1016/S0142-9612(00)00253-2. PMID: 11374443.

12. Tiwari S, Nandlal B. Effect of nano-filled surface coating agent on fluoride release from conventional glass ionomer cement:an in vitro trial. J Indian Soc Pedod Prev Dent. 2013; 31:91–5. DOI: 10.4103/0970-4388.115703. PMID: 23886719.

13. Lee MJ, Kim KM. A study on the fluoride release, microhardness and cytotoxicity of fluoride releasing restorative materials. Korean J Dent Mater. 2016; 43:299–306. DOI: 10.14815/kjdm.2016.43.4.299.

14. Lee KY, Lee SH, Lee NY, Jih MK. A Comparison of the Amount of Fluoride Ion Released and Remineralization Effect on the Initial Caries Lesion of the Various Fluoride Varnishes. J Korean Acad Pediatr Dent. 2016; 43:443–51. DOI: 10.5933/JKAPD.2016.43.4.443.

15. Nicholson JW. Glass ionomer dental cements:update. Mater Technol. 2010; 25:8–13. DOI: 10.1179/175355509X12614966220506.

16. Piwowarczyk A, Lauer HC. Mechanical properties of luting cements after water storage. Oper Dent. 2003; 28:535–42. PMID: 14531599.

17. Hosaka K, Nakajima M, Takahashi M, Itoh S, Ikeda M, Tagami J, Pashley DH. Relationship between mechanical properties of one-step self-etch adhesives and water sorption. Dent Mater. 2009; 26:360–7. DOI: 10.1016/j.dental.2009.12.007.

18. Chuang SF, Jin YT, Tsai PF, Wong TY. Effect of various surface protections on the margin microleakage of resin-modified glass ionomer cements. J Prosthet Dent. 2001; 86:309–14. DOI: 10.1067/mpr.2001.116133. PMID: 11552169.

19. Jevnikar P, Sersa I, Sepe A, Jarh O, Funduk N. Effect of surface coating on water migration into resin modified glass ionomer cements:a magnetic resonance micro-imaging study. Magn Reson Med. 2000; 44:686–91. DOI: 10.1002/1522-2594(200011)44:5<686::AID-MRM5=3.0.CO;2-5. PMID: 11064402.

20. Yli-Urpo H, Vallittu PK, Narhi TO, Forsback AP, Vakiparta M. Release of silica, calcium, phosphorus, and fluoride from glass ionomer cement containing bioactive glass. J Biomater Appl. 2004; 19:5–20. DOI: 10.1177/0085328204044538. PMID: 15245640.

21. Hayacibara MF, Ambrozano GM, Cury JA. Simultaneous release of fluoride and aluminum from dental materials in various immersion media. Oper Dent. 2004; 29:16–22. PMID: 14753327.

22. Gurgan S, Kutuk ZB, Ergin E, Oztas SS, Cakir FY. Four-year randomized clinical trial to evaluate the clinical performance of a glass ionomer restorative system. Oper Dent. 2015; 40:134–43. DOI: 10.2341/13-239-C. PMID: 25299703.

23. Mousavinasab SM, Khosravi K, Tayebghasemi N. Microleakage Assessment of Class V Composite Restorations Rebonded with Three Different Methods. Dent Res J. 2008; 5:21–6.

24. Shiozawa M, Takahashi H, Iwasaki N. Fluoride release and mechanical properties after 1-year water storage of recent restorative glass ionomer cements. Clin Oral Investig. 2014; 18:1053–60. DOI: 10.1007/s00784-013-1074-4. PMID: 23974799.

25. Karantakis P, Helvatjoglou-Antoniades M, Theodoridou-Pahini S, Papadogiannis Y. Fluoride release from three glass ionomers, a compomer, and a composite resin in water, artificial saliva, and lactic acid. Oper Dent. 2000; 25:20–5. PMID: 11203786.

26. Yip HK, Smales RJ. Fluoride release from a polyacid-modified resin composite and 3 resin-modified glass-ionomer materials. Quintessence Int. 2000; 31:261–6. PMID: 11203934.

27. Mazzaoui SA, Burrow MF, Tyas MJ. Fluoride release from glass ionomer cements and resin composites coated with a dentin adhesive. Dent Mater. 2000; 16:166–71. DOI: 10.1016/S0109-5641(00)00003-8. PMID: 10762676.

28. Wiegand A, Buchalla W, Attin T. Review on fluoride-releasing restorative materials-fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Dent Mater. 2007; 23:343–62. DOI: 10.1016/j.dental.2006.01.022. PMID: 16616773.

29. Gao W, Smales RJ. Fluoride release/uptake of conventional and resin-modified glass ionomers, and compomers. J Dent. 2001; 29:301–6. DOI: 10.1016/S0300-5712(00)00053-1. PMID: 11525231.

30. Aliping-McKenzie M, Linden RW, Nicholson JW. The effect of saliva on surface hardness and water sorption of glass-ionomers and “compomers”. J Mater Sci Mater Med. 2003; 14:869–73. DOI: 10.1023/A:1025630609544. PMID: 15348524.