- Evaluation of Setting Time, Solubility, and Compressive Strength of Four Calcium Silicate-Based Cements
-
Jang Y, Kim Y, Lee J, Kim J, Lee J, Han MR, Kim J, Shin J
- KMID: 2542675
- J Korean Acad Pediatr Dent.
- 2023 May;50(2):217-228.
- doi: 10.5933/JKAPD.2023.50.2.217
This study aimed to compare the physical properties of 4 kinds of calcium silicatebased cements (CSCs): 2 kinds of powder-liquid mix type (RetroMTA® [RTMX] and Endocem® MTA Zr [EZMX]) and... -
- CITED
-
- Close
- SHARE
-
- Close
- pH, Ion Release Capability, and Solubility Value of Premixed Mineral Trioxide Aggregates
-
Back S, Jang Y, Lee J, Lee J, Shin J, Kim J, Han M, Kim J
- KMID: 2536592
- J Korean Acad Pediatr Dent.
- 2022 Nov;49(4):379-391.
- doi: 10.5933/JKAPD.2022.49.4.379
The current study aimed to compare the pH, solubility value, and ion release capability of premixed mineral trioxide aggregates (MTAs) versus conventional pulp capping materials before and after setting. The... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of color stability, gloss, mechanical and physical properties according to dental temporary filling materials type
-
Choi JW, Shin YY, Yang SY
- KMID: 2534139
- Korean J Dent Mater.
- 2022 Sep;49(3):97-110.
- doi: 10.14815/kjdm.2022.49.3.97
The objective of this study was to compare the color stability, gloss, mechanical and physical properties of four different types of temporary filling materials. Commercially available hydraulic-setting (HS), powder-liquid (PL),... -
- CITED
-
- Close
- SHARE
-
- Close
- Color stability of provisional restorative materials with different fabrication methods
-
Song SY, Shin YH, Lee JY, Shin SW
- KMID: 2508418
- J Adv Prosthodont.
- 2020 Oct;12(5):259-264.
- doi: 10.4047/jap.2020.12.5.259
PURPOSE The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS For the... -
- CITED
-
- Close
- SHARE
-
- Close
- Calcium silicate-based root canal sealers: a literature review
-
Lim M, Jung C, Shin DH, Cho Yb, Song M
- KMID: 2512026
- Restor Dent Endod.
- 2020 Aug;45(3):e35.
- doi: 10.5395/rde.2020.45.e35
Epoxy resin-based sealers are currently widely used, and several studies have considered AH Plus to be the gold-standard sealer. However, it still has limitations, including possible mutagenicity, cytotoxicity, inflammatory response,... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study on color and dimensional stability of esthetic indirect dental materials
-
Heo HY, Son HJ, Heo YR, Son MK
- KMID: 2470509
- Oral Biol Res.
- 2019 Dec;43(4):306-312.
- doi: 10.21851/obr.43.04.201912.306
In selecting dental materials, color and dimensional stability play key roles in mechanical characteristics as well as esthetic aspects. While resin nano ceramics have been examined to determine their mechanical... -
- CITED
-
- Close
- SHARE
-
- Close
- Enhancement of antigen-specific humoral immune responses and protein solubility through conjugation of bacterial flagellin, Vibrio vulnificus FlaB, to the N-terminus of porcine epidemic diarrhea virus surface protein antigen S0
-
Oh SH, Kim Cho YS, Lee HB, Lee SM, Kim WS, Hong L, Cho CS, Choi YJ, Kang SK
- KMID: 2464086
- J Vet Sci.
- 2019 Nov;20(6):e70.
- doi: 10.4142/jvs.2019.20.e70
Porcine epidemic diarrhea (PED) is a highly contagious enteric swine disease. The large economic impact of PED on the swine industry worldwide has made the development of an effective PED... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements
-
Shibuya K, Ohara N, Ono S, Matsuzaki , Yoshiyama
- KMID: 2463472
- Restor Dent Endod.
- 2019 Nov;44(4):e45.
- doi: 10.5395/rde.2019.44.e45
OBJECTIVES: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of fluoride release and solubility of resin modified glass ionomer with surface coating agents
-
Yoon T, Yoo S
- KMID: 2451755
- J Dent Rehabil Appl Sci.
- 2019 Jun;35(2):81-89.
- doi: 10.14368/jdras.2019.35.2.81
PURPOSE: This study aimed to investigate the correlation between the solubility and the amount of fluoride release when a resin surface coating agent is applied to RMGIC. MATERIALS AND METHODS: To... -
- CITED
-
- Close
- SHARE
-
- Close
- Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
-
Ekici MA, Egilmez F, Cekic-Nagas I, Ergun G
- KMID: 2444147
- J Adv Prosthodont.
- 2019 Apr;11(2):128-137.
- doi: 10.4047/jap.2019.11.2.128
PURPOSE: The aim of this study was to compare the effect of different finishing and polishing techniques on water absorption, water solubility, and microhardness of ceramic or glass-polymer based computer-aided... -
- CITED
-
- Close
- SHARE
-
- Close
- Preparation, characterization, and in vivo evaluation of a polymorphic form of valnemulin hydrogen tartrate
-
Zhu X, Xu S, Lu L, Wang S, Zhao Q, Li D, Li J, Zhao H, Xu B
- KMID: 2454018
- J Vet Sci.
- 2019 Mar;20(2):e16.
- doi: 10.4142/jvs.2019.20.e16
We prepared a polymorphic form of valnemulin hydrogen tartrate (Form I) to overcome the instability and irritating odor of valnemulin hydrochloride that affect its use in the production and application... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of color stability, mechanical and chemical properties according to temporary crown resin type
-
Yang SY, Kwon JY, No JS, Park SY, Park HE, Baek EJ, Im SY, Kwon JS
- KMID: 2448020
- Korean J Dent Mater.
- 2019 Mar;46(1):11-20.
- doi: 10.14815/kjdm.2019.46.1.11
Objective of this study was to compare the color stability, mechanical and chemical properties of three different types of temporary crown resins. Commercially available powder-liquid (Group PL), light-cured (Group LC)... -
- CITED
-
- Close
- SHARE
-
- Close
- Correlation between Fluoride Release, Microhardness and Solubility of High viscosity Glass Ionomers
-
Shin B, Kim J, Yoo S
- KMID: 2431333
- J Korean Acad Pediatr Dent.
- 2018 Nov;45(4):418-425.
- doi: 10.5933/JKAPD.2018.45.4.418
This study was to measure and compare the amount of fluoride, microhardness and solubility of high viscosity glass ionomer and resin-reinforced glass ionomer during 84 days. Fuji IX GP EXTRA, Fuji... -
- CITED
-
- Close
- SHARE
-
- Close
- Discoloration of various CAD/CAM blocks after immersion in coffee
-
Lauvahutanon S, Shiozawa M, Takahashi , Iwasaki N, Oki M, Finger WJ, Arksornnukit M
- KMID: 2367316
- Restor Dent Endod.
- 2017 Feb;42(1):9-18.
- doi: 10.5395/rde.2017.42.1.9
OBJECTIVES: This study evaluated color differences (ΔEs) and translucency parameter changes (ΔTPs) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. MATERIALS AND METHODS: Eight CAD/CAM blocks and four... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins
-
Asar NV, Albayrak H, Korkmaz T, Turkyilmaz I
- KMID: 2118162
- J Adv Prosthodont.
- 2013 Aug;5(3):241-247.
- doi: 10.4047/jap.2013.5.3.241
PURPOSE: To evaluate the effect of various metal oxides on impact strength (IS), fracture toughness (FT), water sorption (WSP) and solubility (WSL) of heat-cured acrylic resin. MATERIALS AND METHODS: Fifty acrylic... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of the strength and wetting characteristics of Bis-GMA/TEGDMA-based adhesives on the bond strength to dentin
-
Park ES, Kim CK, Bae JH, Cho BH
- KMID: 2251819
- J Korean Acad Conserv Dent.
- 2011 Mar;36(2):139-148.
- doi: 10.5395/JKACD.2011.36.2.139
OBJECTIVES: This study investigated the effect of the strength and wetting characteristics of adhesives on the bond strength to dentin. The experimental adhesives containing various ratios of hydrophobic, low-viscosity Bis-M-GMA,... -
- CITED
-
- Close
- SHARE
-
- Close
- Maintaining the Constant Exposure Condition for an Acute Caenorhabditis elegans Mortality Test Using Passive Dosing
-
Kwon HC, Roh JY, Lim D, Choi J, Kwon JH
- KMID: 2380165
- Environ Health Toxicol.
- 2011 ;26(1):e2011015.
OBJECTIVES: Maintaining the constant exposure to hydrophobic organic compouds in acute toxicity tests is one of the most difficult issues in the evaluation of their toxicity and corresponding risks. Passive... -
- CITED
-
- Close
- SHARE
-
- Close
- Occupational Diseases in Workers Exposed to Organic Solvents
-
Kim H
- KMID: 2417497
- Hanyang Med Rev.
- 2010 Nov;30(4):313-318.
Organic solvents are hydrocarbon-based substances that dissolve another substance. Organic solvents are usually lipid soluble, volatile and commonly used for painting, printing, degreasing, cleaning, thinning and extraction. Due to their... -
- CITED
-
- Close
- SHARE
-
- Close
- Physical and chemical properties of experimental mixture of mineral trioxide aggregate and glass ionomer cement
-
Jeong YN, Yang SY, Park BJ, Park YJ, Hwang YC, Hwang IN, Oh WM
- KMID: 2176432
- J Korean Acad Conserv Dent.
- 2010 Sep;35(5):344-352.
- doi: 10.5395/JKACD.2010.35.5.344
OBJECTIVES: The purpose of this study was to determine the setting time, compressive strength, solubility, and pH of mineral trioxide aggregate (MTA) mixed with glass ionomer cement (GIC) and to... -
- CITED
-
- Close
- SHARE
-
- Close
- Synthesis and evaluation of PDLs22 recombinant protein
-
Lee KY, Choi YS, Lee YJ, Bae HS, Kim HJ, Cho KH, Jang HS, Park JC
- KMID: 1962295
- J Korean Acad Periodontol.
- 2007 Mar;37(1):35-44.
- doi: 10.5051/jkape.2007.37.1.35
Periodontal ligament (PDL) is the connective tissue located between the tooth root and alveolar bone. In a previous study, PDLs22 was isolated as a PDL-specific gene by using subtractive hybridization... -
- CITED
-
- Close
- SHARE
-
- Close
