J Korean Acad Conserv Dent.  2008 Mar;33(2):90-97. 10.5395/JKACD.2008.33.2.090.

Effect of application methods of a self-etching primer adhesive system on enamel bond strength

Affiliations
  • 1Department of Conservative Dentistry, College of Dentistry, Chosun University, Korea. ygcho@chosun.ac.kr

Abstract

The purpose of this study was to evaluate the effect of passive or active application of primer and coat times of bond on the shear bond strength when a self-etching primer adhesive (Clearfil SE Bond) was applied to enamel surface. Crowns of sixteen human molars were selected. Buccal and lingual enamels of crowns were partially exposed and slabs of 1.2 mm thick were made. They were divided into one of four equal groups (n = 8). Group 1: passive application of Primer and 1 coat of Bond, Group 2: active application of Primer and 1 coat of Bond, Group 3: passive application of Primer and 2 coats of Bond, Group 4: active application of Primer and 2 coats of Bond. Clearfil AP-X was bonded to enamel suface of each group using Tygon tubes. The bonded specimens were subjected to microshear bond strength (uSBS) testing with a crosshead speed of 1 mm/min. The results of this study were as follows; 1. The uSBS of Group 1 was the lowest among groups and the uSBS of Group 4 was the highest. 2. There was not statistically significant interaction between enamel uSBS by application method of Primer and coat time of Bond (p > 0.05). 3. There was not statistically significant difference between enamel uSBS by passive and active application of Primer (p > 0.05). 4. There was statistically significant difference between enamel uSBS by one- and two-coat of Bond (p < 0.05).

Keyword

Self-etching primer adhesive; Passive or active application of primer; Coat times of bond; Enamel bond strength

MeSH Terms

Adhesives
Crowns
Dental Enamel
Humans
Methacrylates
Molar
Adhesives
Methacrylates

Figure

  • Figure 1 Microshear bond testing of specimen.


Cited by  2 articles

The effect of various bonding systems on the microtensile bond strength of immediate and delayed dentin sealing
Jin-hee Ha, Hyeon-Cheol Kim, Bock Hur, Jeong-Kil Park
J Korean Acad Conserv Dent. 2008;33(6):526-536.    doi: 10.5395/JKACD.2008.33.6.526.

Influence of application methods of one-step self-etching adhesives on microtensile bond strength
Chul-Kyu Choi, Sung-Ae Son, Jin-Hee Ha, Bock Hur, Hyeon-Cheol Kim, Yong-Hun Kwon, Jeong-Kil Park
J Korean Acad Conserv Dent. 2011;36(3):203-210.    doi: 10.5395/JKACD.2011.36.3.203.


Reference

1. Oztas N, Olmez A. Effect of one versus two-layer application of a self-etching adhesives to dentin of primary teeth: a SEM study. J Contemp Dent pract. 2005. 15:18–25.
2. Semeraro S, Mezzanzanica D, Spreafico D, Gagliani M, Re D, Tnanka T, Sidhu SK, Sano H. Effect of different bur grinding on the bond strength of self-etching adhesives. Oper Dent. 2006. 31:317–323.
Article
3. Tani C, Finger WJ. Effect of smear layer thickness on bond strength mediated by three all-in-one self-etching priming adhesives. J Adhes Dent. 2002. 4:283–289.
4. Gregoire G, Millas A. Microscopic evaluation of dentin interface obtained with 10 contemporary self-etching systems: correlation with their pH. Oper Dent. 2005. 30:481–491.
5. De Munk J, Vargas M, Iracki J, Van Landuyt K, Potevin A, Lambrechts P, Van Meerbeek B. One-day bonding effectiveness of new self-etch adhesives to burcut enamel and dentin. Oper Dent. 2005. 30:39–49.
6. Finger WJ, Tani C. Effect of application modes on bonding performance of self-etching adhesives. Am J Dent. 2005. 18:41–44.
7. Miyazaki M, Platt J, Onose H, Moore BK. Influence of dentin primer application methods on dentin bond strength. Oper Dent. 1996. 21:167–172.
8. Chan KM, Tay FR, King NM, Imazato S, Pashley DH. Bonding of mild self-etching primers/adhesives to dentin with thick smear layers. Am J Dent. 2003. 16:340–346.
9. Pashley EL, Agee KA, Pashley DH, Tay FR. Effect of one versus two applications of an unfilled, all-in-one adhesive on dentin bonding. J Dent. 2002. 30:83–90.
Article
10. Ito S, Tay FR, Hashimoto M, Yoshiyama M, Saito T, Brackett WW, Waller JL, Pashley DH. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent. 2005. 7:133–141.
11. Tay FR, Pashley DH, King NM, Carvalho RM, Tsai J, Lai SCN, Marquezini L. Aggressiveness of self-etch adhesives on unground enamel. Oper Dent. 2004. 29:309–316.
12. Pashley DH, Tay FR. Aggressiveness of contemporary self-etch adhesives. part II: Etching effects on unground enamel. Dent Mater. 2004. 17:430–444.
13. Tay FR, Carvalho RM, Sano H, Pashley DH. Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent. 2000. 2:99–116.
14. Torii Y, Itou K, Nishitani Y, Ishikawa K, Suzuki K. Effect of phosphoric acid etching to self-etching primer application on adhesion of resin composite to enamel and dentin. Am J Dent. 2002. 15:305–308.
15. Jacobsen T, Soderholm KJ. Effect of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin. Am J Dent. 1998. 11:225–228.
16. Castro PS, Nunes MF, Perira PNR. Effect of application modes of self-etching primers on dentin bonding strength. J Dent Res. 2000. 81:(Special iss A No.1146).
17. Watanabe IG, Ishizaki H, Oliverira SA, Marshall SJ, Marshall GW. Effects of application technique (agitation vs no-agitation) of a self-etching bonding material on shear bond strength. Expanding horizons of biomaterials and technology. Transactions of fourth international congress on dental materials. 2002. 16:Academy of Dental Materials;165.
18. Miyazaki M, Hinoura K, Honjo G, Onose H. Effect of self-etching primer application method on the enamel bond strength. Am J Dent. 2002. 15:412–416.
19. Swift EJ Jr, Wilder AD Jr, May KN, Waddell SL. Shear bond stregths of one-bottle dentin adhesives using multiple applications. Oper Dent. 1997. 22:194–199.
20. Bonilla ED, Stevenson RG III, Yashar M, Caputo AA. Effect of application technique and dentin bonding agent interaction on shear bond strength. Oper Dent. 2003. 28:568–573.
21. Sano H, Shono T, Sonoda H, Takatsu T, Ciucchi B, Carvalho RM, Pashley DH. Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent Mater. 1994. 10:236–240.
Article
22. Shimada Y, Iwamoto N, Kawashima M, Burrow MF, Tagami J. Shear bond strength of current adhesive systems to enamel, dentin and dentin-enamel junction region. Oper Dent. 2003. 28:585–590.
23. Barkmeier WW, Los SA, Triolo PT Jr. Bond strengths and SEM evaluation of Clearfil Liner Bond 2. Am J Dent. 1995. 8:289–293.
24. Inoue H, Inoue S, Uno S, Takahashi A, Koase K, Sano H. Microtensile bond strength of two single-step adhesive systems to bur-prepared dentin. J Adhes Dent. 2001. 3:129–136.
25. Choi KK, Condon JR, Ferracane JL. The effects of adhesive thickness on polymerization contraction stress of composite. J Dent. 2000. 79:812–817.
Article
26. Hilton TJ, Schwartz RS. The effect of air thinning on dentin adhesive bond strength. Oper Dent. 1995. 20:133–137.
Full Text Links
  • JKACD
Actions
Cited
CITED
export Copy
Close
Share
  • Twitter
  • Facebook
Similar articles
Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr