- Effect of hydrofluoric acid-based etchant at an elevated temperature on the bond strength and surface topography of Y-TZP ceramics
-
Yu MK, Lim MJ, Na NR, Lee KW
- KMID: 2470341
- Restor Dent Endod.
- 2020 Feb;45(1):e6.
- doi: 10.5395/rde.2020.45.e6
OBJECTIVES: This study investigated the effects of a hydrofluoric acid (HA; solution of hydrogen fluoride [HF] in water)-based smart etching (SE) solution at an elevated temperature on yttria-stabilized tetragonal zirconia... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of polymerization shrinkage of dual-cure core build-up resin according to shade and curing mode
-
Choi Y, Lee K, Chang HS
- KMID: 2470501
- Oral Biol Res.
- 2019 Dec;43(4):243-249.
- doi: 10.21851/obr.43.04.201912.243
Polymerization shrinkage of composite resin is closely related to direct or indirect restoration failure. Many studies have reported that curing mode affects polymerization, but few studies have reported whether polymerization... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of dentin surface treatment and exclusive primer on bond strength of a self-adhesive resin cement
-
Lim GE, Son SA, Park JK
- KMID: 2470300
- Korean J Dent Mater.
- 2019 Dec;46(4):195-204.
- doi: 10.14815/kjdm.2019.46.4.195
The purpose of this study was to evaluate the effect of different dentin surface treatments on the bond strength of self-adhesive resin cement (G-CEM one). Human permanent molars were sectioned... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of preparation design on fracture resistance of different monolithic zirconia crowns: A comparative study
-
Findakly M, Jasim HH
- KMID: 2466247
- J Adv Prosthodont.
- 2019 Dec;11(6):324-330.
- doi: 10.4047/jap.2019.11.6.324
PURPOSE: The aim of the study was to evaluate and compare the fracture resistance and modes of fracture of monolithic zirconia crowns with two preparation designs. MATERIALS AND METHODS: Forty human... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of zirconia to resin: The effects of specimen preparation and loading procedure
-
Chen B, Yang L, Lu Z, Meng H, Wu X, Chen C, Xie H
- KMID: 2466246
- J Adv Prosthodont.
- 2019 Dec;11(6):313-323.
- doi: 10.4047/jap.2019.11.6.313
PURPOSE: Shear bond strength (SBS) test is the most commonly used method for evaluating resin bond strength of zirconia, but SBS results vary among different studies even when evaluating the... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements
-
Shibuya K, Ohara N, Ono S, Matsuzaki , Yoshiyama
- KMID: 2463472
- Restor Dent Endod.
- 2019 Nov;44(4):e45.
- doi: 10.5395/rde.2019.44.e45
OBJECTIVES: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used... -
- CITED
-
- Close
- SHARE
-
- Close
- Choice of resin cement shades for a high-translucency zirconia product to mask dark, discolored or metal substrates
-
Dai S, Chen C, Tang M, Chen Y, Yang L, He F, Chen B, Xie H
- KMID: 2462112
- J Adv Prosthodont.
- 2019 Oct;11(5):286-296.
- doi: 10.4047/jap.2019.11.5.286
PURPOSE: The aim was to study the masking ability of high-translucency monolithic zirconia and provide guidance in selecting resin luting cements in order to mask discolored substrates. MATERIALS AND METHODS: 160... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of light-curing on the translucence change and color stability of amine-free dual-cured resin cements
-
Choi SH, Lee BR, Lee BN, Chang HS, Hwang YC, Oh WM, Hwang IN
- KMID: 2463589
- Korean J Dent Mater.
- 2019 Sep;46(3):165-174.
- doi: 10.14815/kjdm.2019.46.3.165
The aim of this study was to investigate the influence of light-curing on the translucency change and color-stability of amine(tertiary)-free dual-cured resin cements after accelerated aging. Two curing modes (dual-curing... -
- CITED
-
- Close
- SHARE
-
- Close
- Colorimetric Analysis of Preformed Zirconia Anterior Crowns for Esthetic Restoration
-
Lee C, Park K, Yang Y, Lee D, Kim J
- KMID: 2457587
- J Korean Acad Pediatr Dent.
- 2019 Aug;46(3):318-327.
- doi: 10.5933/JKAPD.2019.46.3.318
The purpose of this study was to identify which combination of zirconia crowns and cements is most similar in color to the maxillary primary incisors by varying the color of... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of deproteinization and primer treatment on microtensile bond strength of self-adhesive resin cement to dentin
-
Bae IH, Son SA, Park JK
- KMID: 2452689
- Korean J Dent Mater.
- 2019 Jun;46(2):99-108.
- doi: 10.14815/kjdm.2019.46.2.99
The purpose of this study was to evaluate the effects of deproteinization and an additional primer treatment on the microtensile bond strength of a newly developed self-adhesive resin cement to... -
- CITED
-
- Close
- SHARE
-
- Close
- Bond Strength of Band on Zirconia Crown with Compomer and Resin Cement
-
Park C, Lee J, Lee H, Kim J
- KMID: 2449972
- J Korean Acad Pediatr Dent.
- 2019 May;46(2):127-134.
- doi: 10.5933/JKAPD.2019.46.2.127
The aim of this study was to evaluate the compomer cement and resin cement as an orthodontic band cement on zirconia crown. A total of 30 specimens were prepared. Preformed stainless... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of primers on the microtensile bond strength of resin cements to cobalt-chromium alloy
-
Jung HT, Campana SA, Park JH, Shin JH, Lee JY
- KMID: 2444177
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):95-101.
- doi: 10.4047/jkap.2019.57.2.95
PURPOSE: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (µTBS) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- In vivo wear determination of novel CAD/CAM ceramic crowns by using 3D alignment
-
Aladağ A, Oğuz D, Çömlekoğlu ME, Akan E
- KMID: 2444146
- J Adv Prosthodont.
- 2019 Apr;11(2):120-127.
- doi: 10.4047/jap.2019.11.2.120
PURPOSE: To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS: A total... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of pre-curing of two universal adhesives on the shear bond strength of resin cement to zirconia
-
Son GE, Kwon TY, Kim YK
- KMID: 2448021
- Korean J Dent Mater.
- 2019 Mar;46(1):21-32.
- doi: 10.14815/kjdm.2019.46.1.21
This study aimed to investigate whether pre-curing the universal adhesives affect the resin bonding to zirconia ceramic. Two commercial universal adhesives (All-Bond Universal, ABU; Single Bond Universal Adhesive, SBU) were... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength between universal adhesives with various pH and dual-cured resin cements
-
Kwon SJ, Park JK, Son SA
- KMID: 2432013
- Korean J Dent Mater.
- 2018 Dec;45(4):301-310.
- doi: 10.14815/kjdm.2018.45.4.301
The purpose of this study is to evaluate the compatibility of universal adhesives with two dual-cured resin cements. Eighty human molars were divided into eight groups. Tooth was embedded in... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of resin cement color on the color of commercially available zirconia crown
-
Ha HS, Lim BS, Rhee SH
- KMID: 2432008
- Korean J Dent Mater.
- 2018 Dec;45(4):233-242.
- doi: 10.14815/kjdm.2018.45.4.233
The purpose of this study is to evaluate the effect of resin cement color on the color of commercially available zirconia crown. The zirconia and resin cements used for the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of non-thermal plasma on the shear bond strength of resin cements to Polyetherketoneketone (PEKK)
-
Labriaga W, Song SY, Park JH, Ryu JJ, Lee JY, Shin SW
- KMID: 2429373
- J Adv Prosthodont.
- 2018 Dec;10(6):408-414.
- doi: 10.4047/jap.2018.10.6.408
PURPOSE: This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Microtensile bond strength of CAD/CAM-fabricated polymer-ceramics to different adhesive resin cements
-
Sadighpour L, Geramipanah F, Ghasri Z, Neshatian
- KMID: 2455571
- Restor Dent Endod.
- 2018 Nov;43(4):e40.
- doi: 10.5395/rde.2018.43.e40
OBJECTIVES: This study evaluated the microtensile bond strength (µTBS) of polymer-ceramic and indirect composite resin with 3 classes of resin cements. MATERIALS AND METHODS: Two computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated polymer-ceramics (Enamic... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot
-
Choi KH, Son K, Lee DH, Lee KB
- KMID: 2422875
- J Adv Prosthodont.
- 2018 Oct;10(5):381-387.
- doi: 10.4047/jap.2018.10.5.381
PURPOSE: Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface pre-treatments and adhesive types on the shear bond strength between PEKK and Zirconia
-
Jung AM, Kim SM
- KMID: 2423006
- Korean J Dent Mater.
- 2018 Sep;45(3):209-220.
- doi: 10.14815/kjdm.2018.45.3.209
In this study, the effects of surface pre-treatment and adhesive type on the shear bond strength between PEKK (polyetherketoneketone) and zirconia were analyzed by means of shear bond test and... -
- CITED
-
- Close
- SHARE
-
- Close
