- All-ceramic versus titanium-based implant supported restorations: Preliminary 12-months results from a randomized controlled trial
-
Weigl P, Trimpou G, Grizas E, Hess P, Nentwig GH, Lauer HC, Lorenz J
- KMID: 2438931
- J Adv Prosthodont.
- 2019 Feb;11(1):48-54.
- doi: 10.4047/jap.2019.11.1.48
PURPOSE: The aim of the present randomized controlled study was to compare prefabricated all-ceramic, anatomically shaped healing abutments followed by all-ceramic abutments and all-ceramic crowns and prefabricated standard-shaped (round-diameter) titanium... -
- CITED
-
- Close
- SHARE
-
- Close
- Microbiological cleaning and disinfection efficacy of a three-stage ultrasonic processing protocol for CAD-CAM implant abutments
-
Gehrke P, Riebe O, Fischer C, Weinhold O, Dhom G, Sader R, Weigl P
- KMID: 2534690
- J Adv Prosthodont.
- 2022 Oct;14(5):273-284.
- doi: 10.4047/jap.2022.14.5.273
PURPOSE. Computer-aided design and manufacturing (CAD-CAM) of implant abutments has been shown to result in surface contamination from site-specific milling and fabrication processes. If not removed, these contaminants can have... -
- CITED
-
- Close
- SHARE
-
- Close
- In-vitro performance and fracture strength of thin monolithic zirconia crowns
-
Weigl P, Sander A, Wu Y, Felber R, Lauer HC, Rosentritt M
- KMID: 2409626
- J Adv Prosthodont.
- 2018 Apr;10(2):79-84.
- doi: 10.4047/jap.2018.10.2.79
PURPOSE: All-ceramic restorations required extensive tooth preparation. The purpose of this in vitro study was to investigate a minimally invasive preparation and thickness of monolithic zirconia crowns, which would provide... -
- CITED
-
- Close
- SHARE
-
- Close
