Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

more+
SELECT FILTER
 
Close

PUBLICATION DATE

112 results
Display

Pull-off resistance of a screwless implantabutment connection and surface evaluation after cyclic loading

Alevizakos V, Mosch R, Mitov G, Othman A, See Cv

Purpose The aim of this study was to investigate to what extent cyclic load affects the screwless implant-abutment connection for Morse taper dental implants. Materials and Methods 16 implants (SICvantage...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Wear of 3D printed and CAD/CAM milled interim resin materials after chewing simulation

Myagmar G, Lee JH, Ahn JS, Luke Yeo IS, Yoon HI, Han JS

PURPOSE The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Correlation between microhardness and wear resistance of dental alloys against monolithic zirconia

Cha MS, Lee SW, Huh YH, Cho LR, Park CJ

Purpose: The aim of this study is to compare the hardness according to the conditions of metal alloys. Moreover, the correlation between the cast crown hardness before and after wear...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full mouth rehabilitation of iatrogenic attrition patient

Lim NK, Shin SY

Physiologic tooth attrition is accepted as a natural change. But when pathologic changes, such as loss of occlusal vertical dimension, masticatory pain, loss of masticatory function, and loss of esthetics...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full mouth rehabilitation with vertical dimension increase in patient with severely worn out dentition: A case report

Kim DS, Jeong CM, Yun MJ, Huh JB, Lee H, Lee SH

Excessive teeth wear can lead to reduced chewing efficiency, occlusal plane collapse, and facial changes. Full mouth rehabilitation with a change in vertical dimension may cause pain in the temporomandibular...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of the retentive characteristics of two additional attachment used with an implant bar attachment

Choi JW, Chae SK, Huh JB

Purpose: The purpose of this study was to evaluate the retentive characteristics of the additional attachments used with implant bar attachment under repeated insertion/removal cycles. Materials and methods: The newly...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full mouth rehabilitation using transfer coping pick up impression in a patient with severe bleeding: A case report

Ha SR

In the case of excessively worn dentition, there is often insufficient space for the prosthesis, and if physiologically acceptable, the prosthesis can be fabricated by increasing the vertical dimension of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full-mouth rehabilitation in a Stevens-Johnson syndrome patient with severely worn dentition and abnormal root development

Park YH, Ryu R, Ahn SG, Kim KA, Seo JM

Stevens-Johnson syndrome (SJS) is a cytotoxic immune disorder that causes serious damage to the skin and mucous membranes. SJS is a rare disorder that is triggered by particular medications or...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A case of full mouth rehabilitation with vertical dimension gaining in patient withseverely worn dentition and loss of vertical dimension due to loss of posterior support

Jung JA, Bang JH, Lee YS, Kim SY

Gradual tooth wear is a natural process of aging, but pathological wear over physiologic ranges leads to functional and esthetic problems. The loss of posterior support may cause pathological wear of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Oral rehabilitation of excessive tooth wear patient usingzirconia fixed prosthesis with increased vertical dimension

Jang JH, Choi YJ, Ryu JJ

From the point of view of oral rehabilitation, the treatment of extensive tooth wear requires a prosthetic approach. Physiological tooth wear is considered as a normal process and generally does not...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Correlation between meniscal extrusion and symptom duration, alignment, and arthritic changes in medial meniscus posterior root tear: research article

Kim DH, Lee GC, Kim HH, Cha DH

Background: Medial meniscus posterior root tear can result in medial meniscus extrusion. However, the severity of medial meniscus extrusion is different in each root tear patient. The purpose of this...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of zirconia and lithium disilicate tooth- or implant-supported crowns on wear of antagonistic and adjacent teeth

Rosentritt M, Schumann F, Krifka S, Preis V

PURPOSE: To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In vitro evaluation of a removable partial denture framework using multi-directionally forged titanium

Suzuki G, Shimizu S, Torii M, Tokue A, Ying G, Yoshinari M, Hoshi N, Kimoto K, Miura H, Hayakawa T, Ohkubo C

PURPOSE This study evaluated the availability of multi-directionally forged (MDF) titanium (Ti) as a component of removable partial dentures (RPDs). MDF-Ti remarkably improved the mechanical properties of RPDs due to...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Treatment of instability with scapular notching and glenoid component loosing by partial mixed different implant revision

Chung YW, Shin WJ, An KY

In general, reverse shoulder arthroplasty revision is performed using the same implant for both the humerus and glenoid components. However, the authors of the present case used different implants from...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full mouth rehabilitation with vertical increase in patient with severe tooth wear using monolithic zirconia prosthetic restoration

Bang JW, Kim SA, Lim SY, Lee YS

Gradual teeth wear is normal physiological progress, severe tooth wear can causes dysfunction, occlusal plane disharmony and esthetic problems. If additional space is needed for prosthetic restoration due to severe...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique

Yoon SN, Han JS, Yeo IS, Yoon HI

With the evolution of the computer-aided design/computer-aided manufacturing (CAD/CAM) technology, the intraoral scanners are playing an increasingly important role, as they are the first step towards a completely digital workflow....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A study on the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions

Song JH, Kim HJ, Lee GJ

PURPOSE: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. MATERIALS AND METHODS: This study was...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Diagnosis of tooth wear

Lee H, Ko KH, Huh YH, Park CJ, Cho LR

Tooth wear is gradually increasing with increasing life expectancy. In particular, it is important to establish a treatment plan in the early stages so that it does not proceed to...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Wear resistance of indirect composite resins used for provisional restorations supported by implants

Tsujimoto , Jurado C, Villalobos-Tinoco J, Barkmeier , Fischer N, Takamizawa T, Latta M, Miyazaki M

PURPOSE: The aim of this study was to investigate simulated localized and generalized wear of indirect composite resins used for implant supported provisional restorations. MATERIALS AND METHODS: The study investigated ten...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of Nano-filled Protective Coating on Microhardness and Wear Resistance of Glass-ionomer Cements

Ryu W, Park H, Lee J, Seo H

The purpose of this study was to investigate the effect of adding a protective coating on the microhardness and wear resistance of glass ionomer cements (GICs). Specimens were prepared from GIC...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2021 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr