- Effect of applying adhesive after enamel etching on the shear bond strength of orthodontic brackets using light curing resin cements
-
Kim EH, Kim JW, Park SH, Lee Y, Cho KM
- KMID: 2525995
- J Dent Rehabil Appl Sci.
- 2021 Dec;37(4):209-216.
- doi: 10.14368/jdras.2021.37.4.209
Purpose: The purpose of this study is to compare the shear bond strength of resin cement for orthodontic brackets without applying an adhesive primer, to the case of applying an... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of tack cure time on polymerization shrinkage of dual-cure resin cement
-
Choi Y, Heo YK, Jung JH, Chang HS
- KMID: 2524301
- Int J Oral Biol.
- 2021 Dec;46(4):184-189.
- doi: 10.11620/IJOB.2021.46.4.184
When luting indirect restorations with dual-cure resin cement (DCRC), excess cement can be easily removed by performing tack cure of DCRC for a few seconds. The purpose of this study... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of silane and universal adhesives on the micro-shear bond strength of current resin-matrix ceramics
-
Omar S, Burcu GA
- KMID: 2521883
- J Adv Prosthodont.
- 2021 Oct;13(5):292-303.
- doi: 10.4047/jap.2021.13.5.292
PURPOSE The aim of this in vitro study was to evaluate the effect of silane and universal adhesive applications on the micro-shear bond strength (µSBS) of different resin-matrix ceramics (RMCs). MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of microstructural change of zirconia surface on tensile bond strength with resin cement
-
Kang JG, Kim TY, Lee JH, Ji JH, Lee MH, Bae TS, Ahn SG
- KMID: 2521121
- Korean J Dent Mater.
- 2021 Sep;48(3):211-220.
- doi: 10.14815/kjdm.2021.48.3.211
This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a... -
- CITED
-
- Close
- SHARE
-
- Close
- Microhardness of resin cements after light activation through various translucencies of monolithic zirconia
-
Pechteewang S, Salimee P
- KMID: 2519398
- J Adv Prosthodont.
- 2021 Aug;13(4):246-257.
- doi: 10.4047/jap.2021.13.4.246
PURPOSE This study aimed to investigate the Vickers Hardness Number (VHN) of light- and dual cured resin cements cured through monolithic zirconia specimens (VITA YZ) of various translucencies: translucent (T);... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of shear bond strength according to various surface treatment methods of zirconia and resin cement types
-
Bae JH, Bae GH, Park T, Huh JB, Choi JW
- KMID: 2515217
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):153-163.
- doi: 10.4047/jkap.2021.59.2.153
Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength between CAD/CAM denture base resin and denture artificial teeth when bonded with resin cement
-
Han SY, Moon YH, Lee Jh
- KMID: 2508417
- J Adv Prosthodont.
- 2020 Oct;12(5):251-258.
- doi: 10.4047/jap.2020.12.5.251
PURPOSE The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of different surface treatments on the shear bond strengths of two dual-cure resin cements to CAD/CAM restorative materials
-
Turker N, Buyukkaplan U, Başar EK, Özarslan MM
- KMID: 2505357
- J Adv Prosthodont.
- 2020 Aug;12(4):189-196.
- doi: 10.4047/jap.2020.12.4.189
PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Cytotoxic effects of different self-adhesive resin cements: Cell viability and induction of apoptosis
-
Şişmanoğlu S, Demirci M, Schweikl H, Ozen-Eroglu G, Cetin-Aktas E, Kuruca S, Tuncer S, Tekce N
- KMID: 2502333
- J Adv Prosthodont.
- 2020 Apr;12(2):89-99.
- doi: 10.4047/jap.2020.12.2.89
PURPOSE. The effects of four different self-adhesive resin cement materials on cell viability and apoptosis after direct and indirect exposure were evaluated using different cell culture techniques. MATERIALS AND METHODS.... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of thickness and translucency of polymer-infiltrated ceramic-network material on degree of conversion of resin cements
-
Barutcigil K, Büyükkaplan U
- KMID: 2502329
- J Adv Prosthodont.
- 2020 Apr;12(2):61-66.
- doi: 10.4047/jap.2020.12.2.61
PURPOSE. The aim of the present study was to determine the degree of conversion of light- and dual-cured resin cements used in the cementation of all-ceramic restorations under different thicknesses... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of polymerization shrinkage of dual-cure core build-up resin according to shade and curing mode
-
Choi Y, Lee K, Chang HS
- KMID: 2470501
- Oral Biol Res.
- 2019 Dec;43(4):243-249.
- doi: 10.21851/obr.43.04.201912.243
Polymerization shrinkage of composite resin is closely related to direct or indirect restoration failure. Many studies have reported that curing mode affects polymerization, but few studies have reported whether polymerization... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of dentin surface treatment and exclusive primer on bond strength of a self-adhesive resin cement
-
Lim GE, Son SA, Park JK
- KMID: 2470300
- Korean J Dent Mater.
- 2019 Dec;46(4):195-204.
- doi: 10.14815/kjdm.2019.46.4.195
The purpose of this study was to evaluate the effect of different dentin surface treatments on the bond strength of self-adhesive resin cement (G-CEM one). Human permanent molars were sectioned... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of 10-MDP concentration on the adhesion and physical properties of self-adhesive resin cements
-
Shibuya K, Ohara N, Ono S, Matsuzaki , Yoshiyama
- KMID: 2463472
- Restor Dent Endod.
- 2019 Nov;44(4):e45.
- doi: 10.5395/rde.2019.44.e45
OBJECTIVES: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used... -
- CITED
-
- Close
- SHARE
-
- Close
- Choice of resin cement shades for a high-translucency zirconia product to mask dark, discolored or metal substrates
-
Dai S, Chen C, Tang M, Chen Y, Yang L, He F, Chen B, Xie H
- KMID: 2462112
- J Adv Prosthodont.
- 2019 Oct;11(5):286-296.
- doi: 10.4047/jap.2019.11.5.286
PURPOSE: The aim was to study the masking ability of high-translucency monolithic zirconia and provide guidance in selecting resin luting cements in order to mask discolored substrates. MATERIALS AND METHODS: 160... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of light-curing on the translucence change and color stability of amine-free dual-cured resin cements
-
Choi SH, Lee BR, Lee BN, Chang HS, Hwang YC, Oh WM, Hwang IN
- KMID: 2463589
- Korean J Dent Mater.
- 2019 Sep;46(3):165-174.
- doi: 10.14815/kjdm.2019.46.3.165
The aim of this study was to investigate the influence of light-curing on the translucency change and color-stability of amine(tertiary)-free dual-cured resin cements after accelerated aging. Two curing modes (dual-curing... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of deproteinization and primer treatment on microtensile bond strength of self-adhesive resin cement to dentin
-
Bae IH, Son SA, Park JK
- KMID: 2452689
- Korean J Dent Mater.
- 2019 Jun;46(2):99-108.
- doi: 10.14815/kjdm.2019.46.2.99
The purpose of this study was to evaluate the effects of deproteinization and an additional primer treatment on the microtensile bond strength of a newly developed self-adhesive resin cement to... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of primers on the microtensile bond strength of resin cements to cobalt-chromium alloy
-
Jung HT, Campana SA, Park JH, Shin JH, Lee JY
- KMID: 2444177
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):95-101.
- doi: 10.4047/jkap.2019.57.2.95
PURPOSE: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (µTBS) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength between universal adhesives with various pH and dual-cured resin cements
-
Kwon SJ, Park JK, Son SA
- KMID: 2432013
- Korean J Dent Mater.
- 2018 Dec;45(4):301-310.
- doi: 10.14815/kjdm.2018.45.4.301
The purpose of this study is to evaluate the compatibility of universal adhesives with two dual-cured resin cements. Eighty human molars were divided into eight groups. Tooth was embedded in... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of resin cement color on the color of commercially available zirconia crown
-
Ha HS, Lim BS, Rhee SH
- KMID: 2432008
- Korean J Dent Mater.
- 2018 Dec;45(4):233-242.
- doi: 10.14815/kjdm.2018.45.4.233
The purpose of this study is to evaluate the effect of resin cement color on the color of commercially available zirconia crown. The zirconia and resin cements used for the... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of non-thermal plasma on the shear bond strength of resin cements to Polyetherketoneketone (PEKK)
-
Labriaga W, Song SY, Park JH, Ryu JJ, Lee JY, Shin SW
- KMID: 2429373
- J Adv Prosthodont.
- 2018 Dec;10(6):408-414.
- doi: 10.4047/jap.2018.10.6.408
PURPOSE: This study aimed to assess the effect of non-thermal plasma on the shear bond strength of resin cements to polyetherketoneketone (PEKK) in comparison to other surface treatment methods. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
