- Retreatment of implant overdenture using Milled Bar and Attachment in a patient using a unilateral prosthetic arm: A case report
-
Park SH, Jeong CM, Yun MJ, Huh JB, Lee SH
- KMID: 2529452
- J Korean Acad Prosthodont.
- 2022 Apr;60(2):187-194.
- doi: 10.4047/jkap.2022.60.2.187
The use of implants could improve the support, retention, and stability of removable prosthetic restoration for fully edentulous patients with severe alveolar bone resorption. When the prosthesis is manufactured without... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of retentive force and wear pattern of Locator® and ADD-TOC attachments combined with CAD-CAM milled bar
-
Chae SK, Cho WT, Choi JW, Bae EB, Bae JH, Bae GH, Huh JB
- KMID: 2526754
- J Adv Prosthodont.
- 2022 Feb;14(1):12-21.
- doi: 10.4047/jap.2022.14.1.12
PURPOSE The purpose of this study was to investigate changes in retention and wear pattern of Locator® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant overdenture using milled bar and attachment in partially edentulous mandible: a case report
-
Kim MJ, Huh JB, Jeong CM, Yun MJ, Lee SH, Jo YB
- KMID: 2525037
- J Korean Acad Prosthodont.
- 2022 Jan;60(1):71-79.
- doi: 10.4047/jkap.2022.60.1.71
Excessive crown height space increases can cause crestal bone loss and screw loosening after prosthesis is placed. Milled bar and implant overdenture can be used as a treatment method for... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation of a patient by converting poorly maintained fixed implant prosthesis into implant overdenture: a case report
-
Kim YK, Jeong CM, Yun MJ, Lee SH, Huh JB
- KMID: 2525015
- J Korean Acad Prosthodont.
- 2022 Jan;60(1):127-134.
- doi: 10.4047/jkap.2022.60.1.127
Among many contributing factors of implant failure, excessive loading and inflammation contribute mainly to increasing implant failure rate. Especially, poor oral hygiene around implants is one of the most common... -
- CITED
-
- Close
- SHARE
-
- Close
- Mini-implant with additional retentive structure by using digital method
-
Hwang SH, Bae EB, Cho WT, Huh JB
- KMID: 2525014
- J Korean Acad Prosthodont.
- 2022 Jan;60(1):119-126.
- doi: 10.4047/jkap.2022.60.1.119
Mini-implant has been reported as an alternative method to conventional diameter implants in the treatment of mandibular anterior region with narrow ridge. However, one-piece type mini-implant showed biological and technical... -
- CITED
-
- Close
- SHARE
-
- Close
- Full mouth rehabilitation with vertical dimension increase in patient with severely worn out dentition: A case report
-
Kim DS, Jeong CM, Yun MJ, Huh JB, Lee H, Lee SH
- KMID: 2515223
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):210-219.
- doi: 10.4047/jkap.2021.59.2.210
Excessive teeth wear can lead to reduced chewing efficiency, occlusal plane collapse, and facial changes. Full mouth rehabilitation with a change in vertical dimension may cause pain in the temporomandibular... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the retentive characteristics of two additional attachment used with an implant bar attachment
-
Choi JW, Chae SK, Huh JB
- KMID: 2515219
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):173-180.
- doi: 10.4047/jkap.2021.59.2.173
Purpose: The purpose of this study was to evaluate the retentive characteristics of the additional attachments used with implant bar attachment under repeated insertion/removal cycles. Materials and methods: The newly... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of shear bond strength according to various surface treatment methods of zirconia and resin cement types
-
Bae JH, Bae GH, Park T, Huh JB, Choi JW
- KMID: 2515217
- J Korean Acad Prosthodont.
- 2021 Apr;59(2):153-163.
- doi: 10.4047/jkap.2021.59.2.153
Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-assisted removable partial denture using digital guide surgery in partially edentulous mandible: A case report
-
Kim T, Jeong CM, Yun MJ, Lee SH, Lee H, Huh JB
- KMID: 2511653
- J Korean Acad Prosthodont.
- 2021 Jan;59(1):88-96.
- doi: 10.4047/jkap.2021.59.1.88
Fixed implant prostheses or removable partial dentures are common treatment for partially dentulous patients. Recently, an implant-assisted removable partial denture (IARPD) has been introduced and is widely used. In the... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-Fixed Prostheses Restoration with New Retention Type Using Spread Fit Ti-Base System: A Case Report
-
Park TM, Jeong CM, Kim S, Kim S, Huh JB
- KMID: 2511896
- Implantology.
- 2020 Dec;24(4):203-211.
- doi: 10.32542/implantology.202018
Spread Fit (SFIT) Ti-Base System was developed to overcome complications of conventional implant prosthesis system. This system uses a specific locking mechanism between the abutment and prosthesis instead of cement or... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of dentures for a patient with unstable mandibular movements: A case report
-
Han SR, Jeong CM, Yun MJ, Huh JB, Lee SH, Lee H
- KMID: 2508382
- J Korean Acad Prosthodont.
- 2020 Oct;58(4):378-384.
- doi: 10.4047/jkap.2020.58.4.378
For patients with unstable mandibular movements and centric relation of the mandible due to long-term use of ill-fitting dentures, the successful fabrication of new dentures is challenging. Before fabrication new... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effect of ZrO2 Slurry Application to the Pre-sintered Zirconia Surface on Bonding Strength
-
Jo YB, Ahn JJ, Lee SH, Park T, Huh JB
- KMID: 2507355
- Implantology.
- 2020 Jun;24(2):76-82.
- doi: 10.32542/implantology.202008
Purpose: This study was conducted to evaluate the roughness changes of zirconia surface after applying three different concentrations of ZrO2 slurry (ZirADD, PNUADD, Busan, Korea) to the pre-sintered zirconia surface... -
- CITED
-
- Close
- SHARE
-
- Close
- Clinical accuracy of impression technique using digital superimposition ofcustomized abutment with subgingival margin: A case report
-
Kim JW, Jeong CM, Yun MJ, Lee SH, Lee H, Huh JB
- KMID: 2500030
- J Korean Acad Prosthodont.
- 2020 Apr;58(2):169-175.
- doi: 10.4047/jkap.2020.58.2.169
Traditionally, gingival retraction has been performed to obtain customized abutment impressions with subgingival margins of the implant supported prosthesis. However, gingival retraction may have side effects such as gingival recession and... -
- CITED
-
- Close
- SHARE
-
- Close
- A conversion to implant assisted removable partial denture infailed fixed implant prosthesis of mandible: A case report
-
Jin SL, Jeong CM, Yun MJ, Huh JB, Lee HJ, Lee SH
- KMID: 2500029
- J Korean Acad Prosthodont.
- 2020 Apr;58(2):161-168.
- doi: 10.4047/jkap.2020.58.2.161
Failure of fixed implant supported prosthesis is caused by biomechanical factors such as excessive occlusal stress and biological factors such as bacterial infections and inflammation. Implants with severe bone resorption that... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-assisted removable partial denture using milled bar and Locatorin partially edentulous maxilla: A case report
-
Kim JH, Jeong CM, Yun MJ, Huh JB, Lee HJ, Lee SH
- KMID: 2500026
- J Korean Acad Prosthodont.
- 2020 Apr;58(2):137-144.
- doi: 10.4047/jkap.2020.58.2.137
Implant-fixed prostheses and removable partial dentures are widely used as a traditional treatment method for partially edentulous patients who have lost multiple teeth. Recently, there has been increasing interest in implant-assisted... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-assisted removable partial denture using freely removable abutment in a fully edentulous patient: A case report
-
Oh YK, Jeong CM, Yun MJ, Lee SH, Lee HJ, Huh JB
- KMID: 2469922
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):58-66.
- doi: 10.4047/jkap.2020.58.1.58
Implant-Assisted Removable Partial Dentures (IARPDs) treatment is being performed in a fully edentulous patient using implant surveyed prosthesis as an abutment. Implant-supported prosthesis as an abutment of IARPDs is classified... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant overdenture of mandible with severe unilateral atrophy: Report of two cases
-
Kim SY, Kwon EY, Jung KH, Jeon HM, Baek YJ, Yun MJ, Huh JB
- KMID: 2453782
- J Korean Acad Prosthodont.
- 2019 Jul;57(3):271-279.
- doi: 10.4047/jkap.2019.57.3.271
There are several unfavorable conditions regarding alveolar bone condition that may compromise the denture patient's satisfaction. Chewing efficiency may not be satisfactory when alveolar bone is deficient, and the denture... -
- CITED
-
- Close
- SHARE
-
- Close
- A prospective clinical of lithium disilicate pressed zirconia and monolithic zirconia in posterior implant-supported prostheses: A 24-month follow-up
-
Roh KW, Jeon YC, Jeong CM, Yun MJ, Huh JB, Lee SH, Yang DS, Bae EB
- KMID: 2444182
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):134-141.
- doi: 10.4047/jkap.2019.57.2.134
PURPOSE: The purpose of this study was to compare the clinical outcomes of lithium disilicate ceramic pressed zirconia prostheses and monolithic zirconia prostheses and to investigate the complications after two... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro evaluation of the wear resistance of provisional resin materials fabricated by different methods
-
Ahn JJ, Huh JB, Choi JW
- KMID: 2444179
- J Korean Acad Prosthodont.
- 2019 Apr;57(2):110-117.
- doi: 10.4047/jkap.2019.57.2.110
PURPOSE: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. MATERIALS AND METHODS: Four types of resin materials made with different methods... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant-Supported Fixed Dental Prostheses with New Retention Type Using Zirconia Ball and Nickel-Titanium Spring
-
Choi JW, Song CH, Huh JB
- KMID: 2469489
- Implantology.
- 2019 Mar;23(1):16-24.
- doi: 10.32542/implantology.2019002
EZ Crown system (EZC), a new retention type implant prosthetic system that has not only easy retrievability but also no complication due to residual cement, was developed to overcome the... -
- CITED
-
- Close
- SHARE
-
- Close
