- Changes in maximum lip-closing force after extraction and nonextraction orthodontic treatments
-
Choi TH, Kim SH, Kim C, Kook YA, Larson BE, Lee NK
- KMID: 2471872
- Korean J Orthod.
- 2020 Mar;50(2):120-128.
- doi: 10.4041/kjod.2020.50.2.120
OBJECTIVE: The aims of the present study were to evaluate the changes in the maximum lip-closing force (MLF) after orthodontic treatment with or without premolar extractions and verify the correlation... -
- CITED
-
- Close
- SHARE
-
- Close
- Sex-, growth pattern-, and growth status-related variability in maxillary and mandibular buccal cortical thickness and density
-
Schneider , Gandhi V, Upadhyay M, Allareddy , Tadinada A, Yadav S
- KMID: 2471871
- Korean J Orthod.
- 2020 Mar;50(2):108-119.
- doi: 10.4041/kjod.2020.50.2.108
OBJECTIVE: The primary objective of this study was to quantitatively analyze the bone parameters (thickness and density) at four different interdental areas from the distal region of the canine to... -
- CITED
-
- Close
- SHARE
-
- Close
- Posterior dental compensation and occlusal function in adults with different sagittal skeletal malocclusions
-
Hwang S, Choi YJ, Jung S, Kim S, Chung CJ, Kim KH
- KMID: 2471870
- Korean J Orthod.
- 2020 Mar;50(2):98-107.
- doi: 10.4041/kjod.2020.50.2.98
OBJECTIVE: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. METHODS: Transverse skeletal parameters and posterior tooth inclinations... -
- CITED
-
- Close
- SHARE
-
- Close
- Three types of ossifying fibroma: A report of 4 cases with an analysis of CBCT features
-
Jih MK, Kim JS
- KMID: 2471847
- Imaging Sci Dent.
- 2020 Mar;50(1):65-71.
- doi: 10.5624/isd.2020.50.1.65
Ossifying fibroma is a slow-growing benign neoplasm that occurs most often in the jaws, especially the mandible. The tumor is composed of bone that develops within fibrous connective tissue. Some... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of slice inclination and object position within the field of view on the measurement accuracy of potential implant sites on cone-beam computed tomography
-
Vadiati Saberi B, Khosravifard N, Nourzadeh
- KMID: 2471844
- Imaging Sci Dent.
- 2020 Mar;50(1):37-43.
- doi: 10.5624/isd.2020.50.1.37
PURPOSE: The purpose of this study was to evaluate the accuracy of linear measurements in the horizontal and vertical dimensions based on object position and slice inclination in cone-beam computed... -
- CITED
-
- Close
- SHARE
-
- Close
- Judgement in artificial eruption of embedded teeth from an oral surgery perspective: review article
-
Mahardawi , K C K, Arunakul K, Chaiyasamut T, Wongsirichat N
- KMID: 2471107
- J Korean Assoc Oral Maxillofac Surg.
- 2020 Feb;46(1):12-18.
- doi: 10.5125/jkaoms.2020.46.1.12
Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of zirconia and lithium disilicate tooth- or implant-supported crowns on wear of antagonistic and adjacent teeth
-
Rosentritt M, Schumann F, Krifka S, Preis V
- KMID: 2470791
- J Adv Prosthodont.
- 2020 Feb;12(1):1-8.
- doi: 10.4047/jap.2020.12.1.1
PURPOSE: To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent... -
- CITED
-
- Close
- SHARE
-
- Close
- Marginal and internal discrepancy of 3-unit fixed dental prostheses fabricated by subtractive and additive manufacturing
-
Choi JW
- KMID: 2469915
- J Korean Acad Prosthodont.
- 2020 Jan;58(1):7-13.
- doi: 10.4047/jkap.2020.58.1.7
PURPOSE: This study was to evaluate marginal and internal discrepancy of 3-unit fixed dental prostheses (FDP) fabricated by subtractive manufacturing and additive manufacturing. MATERIALS AND METHODS: 3-unit bridge abutments without the... -
- CITED
-
- Close
- SHARE
-
- Close
- Comprehensive orthodontic treatment of a young girl with an odontogenic keratocyst and impacted teeth in the mandible
-
Baik WK, Baik HS, Choi SH
- KMID: 2468642
- Korean J Orthod.
- 2020 Jan;50(1):63-71.
- doi: 10.4041/kjod.2020.50.1.63
Odontogenic keratocysts (OKCs) are one of the most aggressive cysts in the oral and maxillofacial area because of their high recurrence rate and infiltrative behavior. In growing patients with OKCs,... -
- CITED
-
- Close
- SHARE
-
- Close
- A study of incidence of palatal side abfractions in maxillary posterior teeth
-
Song JH, Heo Y, Lee GJ
- KMID: 2470625
- J Dent Rehabil Appl Sci.
- 2019 Dec;35(4):206-213.
- doi: 10.14368/jdras.2019.35.4.206
PURPOSE: Most of studies dealing with abfractions are limited to the buccal surfaces of the teeth. In this study, we analyzed the cause for abfraction by investigating the incidence of... -
- CITED
-
- Close
- SHARE
-
- Close
- An alternative approach for the management of missing lateral incisors through the intentional retention of primary canines
-
Jang EJ, Jeong TS, Shin JH, Kim S
- KMID: 2470514
- Oral Biol Res.
- 2019 Dec;43(4):349-355.
- doi: 10.21851/obr.43.04.201912.349
Patients with congenitally missing or undeveloped lateral incisors are less likely to have normal teeth alignment. Traditional treatment methods in these patients have been used for creating space for prosthetic... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimentional finite element analysis of a mandibular premolar with reduced periodontal support under a non-axial load
-
Yang SM, Chung HJ
- KMID: 2470510
- Oral Biol Res.
- 2019 Dec;43(4):313-326.
- doi: 10.21851/obr.43.04.201912.313
This study analyzed stress profiles of a mandibular premolar and its supporting periodontium under non-axial occlusal load as a function of the level of periodontal bone support using finite element... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of preparation design on fracture resistance of different monolithic zirconia crowns: A comparative study
-
Findakly M, Jasim HH
- KMID: 2466247
- J Adv Prosthodont.
- 2019 Dec;11(6):324-330.
- doi: 10.4047/jap.2019.11.6.324
PURPOSE: The aim of the study was to evaluate and compare the fracture resistance and modes of fracture of monolithic zirconia crowns with two preparation designs. MATERIALS AND METHODS: Forty human... -
- CITED
-
- Close
- SHARE
-
- Close
- Longitudinal management of recurrent temporomandibular joint ankylosis from infancy to adulthood in perspective of surgical and orthodontic treatment
-
Lim SW, Choi JY, Baek SH
- KMID: 2464204
- Korean J Orthod.
- 2019 Nov;49(6):413-426.
- doi: 10.4041/kjod.2019.49.6.413
This study was performed to describe the longitudinal management of recurrent temporomandibular joint (TMJ) ankylosis from infancy to adulthood in perspective of surgical and orthodontic treatment. A 2-year-old girl was... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of archwire stiffness and friction on maxillary posterior segment displacement during anterior segment retraction: A three-dimensional finite element analysis
-
Park CS, Yu HS, Cha JY, Mo SS, Lee KJ
- KMID: 2464202
- Korean J Orthod.
- 2019 Nov;49(6):393-403.
- doi: 10.4041/kjod.2019.49.6.393
OBJECTIVE: Sliding mechanics using orthodontic miniscrews is widely used to stabilize the anchorage during extraction space closure. However, previous studies have reported that both posterior segment displacement and anterior segment... -
- CITED
-
- Close
- SHARE
-
- Close
- The influence of leukocyte-platelet-rich plasma on accelerated orthodontic tooth movement in rabbits
-
Nakornnoi , Leethanakul C, Samruajbenjakun B
- KMID: 2464200
- Korean J Orthod.
- 2019 Nov;49(6):372-380.
- doi: 10.4041/kjod.2019.49.6.372
OBJECTIVE: To determine the effects of a local injection of leukocyte-platelet-rich plasma (L-PRP) on orthodontic tooth movement in rabbits. METHODS: Twenty-three male New Zealand white rabbits were included in a split-mouth... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional analysis of tooth movement in Class II malocclusion treatment using arch wire with continuous tip-back bends and intermaxillary elastics
-
Lee JY, Choi SK, Kwon TH, Kang KH, Kim SC
- KMID: 2464198
- Korean J Orthod.
- 2019 Nov;49(6):349-359.
- doi: 10.4041/kjod.2019.49.6.349
OBJECTIVE: The aim of this study was to analyze three-dimensional (3D) changes in maxillary dentition in Class II malocclusion treatment using arch wire with continuous tip-back bends or compensating curve,... -
- CITED
-
- Close
- SHARE
-
- Close
- A case report of multiple bilateral dens invaginatus in maxillary anteriors
-
Chung SH, Hwang YJ, You SY, Hwang YH, Oh S
- KMID: 2463467
- Restor Dent Endod.
- 2019 Nov;44(4):e39.
- doi: 10.5395/rde.2019.44.e39
The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of marginal adaptation in three-unit frameworks fabricated with conventional and powder-free digital impression techniques
-
Kocaağaoğlu H, Albayrak H, Cinel Sahin S, Gürbulak
- KMID: 2462109
- J Adv Prosthodont.
- 2019 Oct;11(5):262-270.
- doi: 10.4047/jap.2019.11.5.262
PURPOSE: The purpose of this in vitro study was to evaluate the marginal misfits of three-unit frameworks fabricated with conventional and digital impressions techniques. MATERIALS AND METHODS: Thirty brass canine and... -
- CITED
-
- Close
- SHARE
-
- Close
- Surgical extrusion of a maxillary premolar after orthodontic extrusion: a retrospective study
-
Choi YH, Lee HJ
- KMID: 2461477
- J Korean Assoc Oral Maxillofac Surg.
- 2019 Oct;45(5):254-259.
- doi: 10.5125/jkaoms.2019.45.5.254
OBJECTIVES: Crown-root fracture and cervical caries in maxillary premolars constitute a challenge in cases of subgingival placement of restoration margins. Surgical extrusion has been practiced successfully in permanent anterior teeth.... -
- CITED
-
- Close
- SHARE
-
- Close
