Implantology.
2019 Jun;23(2):112-125. 10.32542/implantology.2019010.
Considerations for Fabrication of CAD-CAM Abutments: Part II. Designing Abutment
- Affiliations
-
- 1Assistant professor, DDS, Ph.D., Gangneung-Wonju National University, Korea.
- 2Private practice, DDS, MSD., Duri Dental Clinic, Seosan, Korea.
- 3Professor, DDS, Ph.D., Gangneung-Wonju National University, Korea. lila@gwnu.ac.kr
- KMID: 2469472
- DOI: http://doi.org/10.32542/implantology.2019010
Abstract
- CAD-CAM (computer aided design-computer aided manufacturing) abutment is a convenient and useful prosthetic method in tilted implant installation or complicated esthetic situations. However, the dentist must design properly and order wisely so that favorable clinical results can be obtained. Herein, we investigate various factors such as connection type, prosthesis type, margin, emergence profile and gingival contact shape that must be considered in the designing CAD-CAM abutments.
- Full Text Links
-
- Actions
-
Cited
- CITED
-
- Close
- Share
-
- Similar articles
-
- Considerations for Fabrication of CAD-CAM Abutments: Part I. Selection of Titanium Block and Fabrication Process
- Influence of the implant abutment types and the dynamic loading on initial screw loosening
- Comparison of CAD/CAM abutment and prefabricated abutment in Morse taper internal type implant after cyclic loading: Axial displacement, removal torque, and tensile removal force
- A comparative study on the fit and screw joint stability of ready-made abutment and CAD-CAM custom-made abutment
- A comparative study of gold UCLA-type and CAD/CAM titanium implant abutments
