J Korean Orthop Assoc.  1994 Jun;29(3):979-987. 10.4055/jkoa.1994.29.3.979.

Morphometric Study of the Pedicle of Lumbar and Selected Thoracic Vertebrae for Surgical Spinal Fixation

Abstract

The pedicle instrumentation has become a popular way of spinal fixation. Placement of a screw through the pedicle into vertebral body appears to be a very successful way to accomplish spinal fixation. However, the configuration of the pedicle morphometry must be understood. The measurement includes pedicle width, angle of pedicle axis to the transverse plane, ideal screw length, ideal screw entry point and ideal angle. This study was accomplished using computerized axial tomogram(CT) of 704 vertebrae(T10-L5). The results were as follows. 1. Transverse pedicle diameter were narrowest at T10, widest at L5. 2. The pedicle axis is oriented anteromedially at all levels except T11 and T12, then increase from L1 to L5. 3. Screw lengths are fairly constant between all levels, thus the range of screw lengths need is limited. 4. The incidence of pedicle less than 6 mm in the transverse diameter is most common at T10 and followed by levels L1, T12 and L2. Preoperative determination of transpedicular screw diameter and length can be made, by direct measurement from the patient's CT scan.

Keyword

Pedicles; Morphometry; CT scanning

MeSH Terms

Incidence
Thoracic Vertebrae*
Tomography, X-Ray Computed
Full Text Links
  • JKOA
Actions
Cited
CITED
export Copy
Close
Share
  • Twitter
  • Facebook
Similar articles
Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr