- The marginal fidelity of Procera(R) AllCeram alumina copings and crowns of patients
-
Song YG, Cho IH, Lee JH
- KMID: 2000404
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):470-478.
- doi: 10.4047/jkap.2008.46.5.470
STATEMENT OF PROBLEM: Use of all-ceramic prostheses fabricated with CAD/CAM systems is increasing in the dentistry. Marginal fidelity in production of all-ceramic restoration has important clinical implications and is a... -
- CITED
-
- Close
- SHARE
-
- Close
- Detorque force and surface change of coated abutment screw after repeated closing and opening
-
Jang JS, Kim HJ, Chung CH
- KMID: 2000407
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):500-510.
- doi: 10.4047/jkap.2008.46.5.500
STATEMENT OF PROBLEM: Recently researches about WC/C (Tungsten Carbide/Carbon) or TiN (Titanium Nitride) coating on abutment screws are going on. It decreases friction coefficient, resistance against corrosion and withdrawal of... -
- CITED
-
- Close
- SHARE
-
- Close
- Shade comparative analysis of natural tooth measured by visual and spectrophotometric methods
-
Kim BS, Shin SY, Lee JH
- KMID: 2000402
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):443-454.
- doi: 10.4047/jkap.2008.46.5.443
STATEMENT OF PROBLEM: A clinically successful color match is one of the important factor to get an esthetic dental restoration. Dental shade guides are commonly used to evaluate tooth color... -
- CITED
-
- Close
- SHARE
-
- Close
- Stress distribution in bone surrounding maxillary molar implants under different crown-to-fixture ratio: A 3D FEM analysis
-
Park JC, Shin SW, Kwon KR
- KMID: 2000405
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):479-489.
- doi: 10.4047/jkap.2008.46.5.479
STATEMENT OF THE PROBLEM: Under anatomical limitations on maxillary posterior region, a poor crown-to root ratio acting on dental implants can result in undesirable stress in surrounding bone, which in... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of marginal fit before and after porcelain build-up of two kinds of CAD/CAM zirconia all-ceramic restorations
-
Shin HS, Kim SG
- KMID: 2000410
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):528-534.
- doi: 10.4047/jkap.2008.46.5.528
PURPOSE: Marginal fit is one of the important components for the successful prosthodontic restoration. Poor fitting margin of the restoration causes hypersensitivity, secondary caries, and plaque accumulation, which later result... -
- CITED
-
- Close
- SHARE
-
- Close
- Surface characteristics and stability of implants treated with alkali and heat
-
Song YS, Cho IH
- KMID: 2000406
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):490-499.
- doi: 10.4047/jkap.2008.46.5.490
STATEMENT OF PROBLEM: Bioactive materials must have the ability to spontaneously form a bone like apatite layer on their surface and induce direct biochemical bonding to bone. A simple chemical... -
- CITED
-
- Close
- SHARE
-
- Close
- Oral health status and treatment need of institutionalized elderly patients
-
Yang SB, Moon HS, Han DH, Lee HY, Chung MK
- KMID: 2000403
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):455-469.
- doi: 10.4047/jkap.2008.46.5.455
STATEMENT OF PROBLEMS: In the area of dental care, the institutionalized elderly have placed the most vulnerable state, and we cannot find their subjective need of dental treatment because of... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of activators contained in adhesives on dentin bond strengths
-
Kang HK, Shin JH, Suh KW, Ryu JJ
- KMID: 2000408
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):511-519.
- doi: 10.4047/jkap.2008.46.5.511
STATEMENT OF PROBLEM: An incompatibility between the initiator systems of self-curing composite resins and light-curing adhesives was supposed recently. PURPOSE: The purpose of the study was to evaluate the influence... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of laser-irradiated dentin on shear bond strength of composite resin
-
Kim SS, Park JI, Lee JI, Kim GS, Cho HW
- KMID: 2000409
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):520-527.
- doi: 10.4047/jkap.2008.46.5.520
PURPOSE: This study was conducted to evaluate the shear bond strength of composite resin to dentin when etched with laser instead of phosphoric acid. MATERIAL AND METHODS: Recently extracted forty... -
- CITED
-
- Close
- SHARE
-
- Close
- The study of shear bond strength of a self-adhesive resin luting cement to dentin
-
In HS, Park JI, Choi JI, Cho HW, Dong JK
- KMID: 2000411
- J Korean Acad Prosthodont.
- 2008 Oct;46(5):535-543.
- doi: 10.4047/jkap.2008.46.5.535
PURPOSE: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the... -
- CITED
-
- Close
- SHARE
-
- Close
