- Full mouth rehabilitation of a patient with worn dentition and loss of posterior support by vertical dimension reestablishment: a clinical report
-
Ryu JH, Lee WS, Lee CW, Lee SY
- KMID: 2416815
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):227-234.
- doi: 10.4047/jkap.2018.56.3.227
Excessive teeth wear may result in the complications such as esthetic problems, hypersensitivity, and loss of vertical dimension. This clinical report focuses on the causes of severely worn dentition and... -
- CITED
-
- Close
- SHARE
-
- Close
- Retreatment of fractured implant overdenture due to long-term maintenance failure
-
Kim M, Hong S, Paek J, Noh K, Pae A, Kim HS, Kwon KR
- KMID: 2416816
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):235-242.
- doi: 10.4047/jkap.2018.56.3.235
Periodontal and prosthodontic maintenance of implant overdenture is a very important factor for the long term success of the prosthesis and implants. Failure of maintenance can lead to prosthetic failure... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the accuracy of digital impressions and traditional impressions: Systematic review
-
Kim KR, Seo K, Kim S
- KMID: 2416819
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):258-268.
- doi: 10.4047/jkap.2018.56.3.258
PURPOSE: This study systematically examines literatures on the suitability of prostheses and accuracy of obtained impressions to see if digital impressions using intraoral scanners can replace traditional impressions. MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- A case of removable dentures using digital method
-
Lee JS, Ahn SJ, Leesungbok R, Lee SW
- KMID: 2416818
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):250-257.
- doi: 10.4047/jkap.2018.56.3.250
Generally dentures are manufactured by conventional method, however the frequency of fabricating denture using digital method is increasing due to the recent development of digital technology in dentistry. The digital... -
- CITED
-
- Close
- SHARE
-
- Close
- Rehabilitation of severely worn dentition using Monolithic surveyed restoration and electronic surveying in RPD metal framework fabrication: A case report
-
Choi Y, Kim HS, Kwon KR, Pae A, Noh K, Paek J, Hong S
- KMID: 2416817
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):243-249.
- doi: 10.4047/jkap.2018.56.3.243
Excessive tooth wear results in unacceptable damage to the occlusal surface and can cause pulpitis, occlusal disharmony, dysfunction, and unesthetic result. Patients with severe attrition have to be classified as... -
- CITED
-
- Close
- SHARE
-
- Close
- The incidence of the abutment screw loosening and its affecting factors in posterior implant restorations
-
Hong SJ, Bae JY, Kim HH
- KMID: 2416813
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):212-217.
- doi: 10.4047/jkap.2018.56.3.212
PURPOSE: This study was to assess clinically the incidence of abutment screw loosening of posterior implant-supported fixed prosthesis and its affecting factors. MATERIALS AND METHODS: 391 implant-supported crowns restored from January... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-year follow-up of full mouth rehabilitation with anterior implant surveyed bridges and distal extension removable partial denture
-
Gil KS, Yi HG, Kim KA, Lee JJ, Seo JM
- KMID: 2416814
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):218-226.
- doi: 10.4047/jkap.2018.56.3.218
In partial edentulous patients, implant-assisted removable partial denture which provide additional retention and support by placing a small number of implants in strategic positions might be suitable treatment. This case... -
- CITED
-
- Close
- SHARE
-
- Close
- Survey study on the Preference of Dental Medical Personnel for Dental CAD/CAM Milling Machines
-
Song ES, Kim B, Lim YJ, Lee JJ
- KMID: 2416810
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):188-198.
- doi: 10.4047/jkap.2018.56.3.188
PURPOSE: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry.... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of heat to remove cement on implant titanium abutment and screw
-
Yi HG, Gil KS, Lee JJ, Ahn SG, Seo JM
- KMID: 2416809
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):179-187.
- doi: 10.4047/jkap.2018.56.3.179
PURPOSE: The purpose of this study was to investigate the effect of heat applied to disintegrate cement on the removal torque value and fracture strength of titanium abutment and abutment... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of internal gap on retentivity in implant fixed prosthesis with lingual slot
-
Kim TK, Lee KB
- KMID: 2416812
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):206-211.
- doi: 10.4047/jkap.2018.56.3.206
PURPOSE: Recently, a method of forming a slot in the prosthesis lingual has been introduced to solve the occlusal and aesthetic disadvantages of screw-retained prosthesis in the manufacture of implant-fixed... -
- CITED
-
- Close
- SHARE
-
- Close
- Nonthermal plasma on the shear bond strength of relining resin to thermoplastic denture base resin
-
Manaloto-Ceballos L, Labriaga W, Song SY, Park JH, Lee JY, Shin SW
- KMID: 2416811
- J Korean Acad Prosthodont.
- 2018 Jul;56(3):199-205.
- doi: 10.4047/jkap.2018.56.3.199
PURPOSE: This study evaluated the effect of nonthermal plasma treatment on the bond strength of autopolymerizing relining resin to the injection molded thermoplastic denture base resins (TDBRs) with different surface... -
- CITED
-
- Close
- SHARE
-
- Close
