- An analysis and management of fractured implants
-
Han CH, Kim SH, Hee SJ, Ku Y
- KMID: 2195904
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):25-36.
Among the numerous factors contributing to implant failure, the most common are infection, failure of proper healing and overload. These factors may occur combined. Implant fractures are one of the... -
- CITED
-
- Close
- SHARE
-
- Close
- Color stability of ceromers after thermocycling and brushing
-
Yi YJ, Cho LR
- KMID: 2195905
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):37-48.
Ceromers, new indirect resin system, are now being adopted for esthetic restorations. Despite of its translucency and good color matching, color stability after long-term use was unknown till now. This... -
- CITED
-
- Close
- SHARE
-
- Close
- A comparative study of surface characteristics of direct reline resins
-
An JK, Lee JK, Chung CH
- KMID: 2195906
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):49-57.
The use of autopolymerizing-cured resin and light-cured resin for direct introral relining of complete and partial dentures has been popular. The purpose of this investigation was to determine the surface... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the abrasiveness of ceromers on enamel and gold alloy
-
Jung HK, Yang HS
- KMID: 2195910
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):96-104.
This study was performed to compare the abrasiveness and wear resistance of several restorative materials occluding enamel and gold alloy. Intact labial surface of bovine incisor and the plain portion... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the fit of implant-retained prostheses using electric discharge machining
-
Han ET, Kim YS, Kim CW, Yang JH
- KMID: 2195902
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):1-13.
An absolutely passive fit at the interface with the superstructure and the abutment cylinders is need for implant longevity. In this study, A method of cast framework correction using spark... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of fracture strength between hybrid-ceramic crown and metal-ceramic crown
-
Ku CW, Yang HS
- KMID: 2195903
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):14-24.
The purpose of this study was to compare the fracture strengths and the fracture patterns of several hybrid-ceramic crowns and metal-ceramic crown. Ten crowns were constructed for each group according... -
- CITED
-
- Close
- SHARE
-
- Close
- A clinical study on the retention of maxillary complete denture with different denture base materials
-
Lee JH, Lim JH, Cho IH
- KMID: 2195907
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):58-70.
For the successful treatment of complete denture, obtaining a good retention is essential. There are lots of factors affecting denture retention. Denture material, one of those factors affecting denture retention,... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of various surface treatment methods on the osseointegration
-
Choi JW, Ann W, Kim KN, Heo SJ, Chang IT, Han CH, Baek HG, Choi YC
- KMID: 2195908
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):71-83.
The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length... -
- CITED
-
- Close
- SHARE
-
- Close
- The effects of denture cleansers and disinfectants on the color, surface hardness, surface roughness of denture base resins
-
Yang HJ, Jang BS, Chung DJ, Heo SJ, Han DH, Shim JS, Chang MW
- KMID: 2195911
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):105-112.
The purpose of this study is to compare effects of denture cleansers and disinfectants on the color, surface hardness, and surface roughness of reinforced acrylic resin using polyhedral oligosilsesquioxane molecules(POSS... -
- CITED
-
- Close
- SHARE
-
- Close
- A study on the resistance of wear and cytotoxicity of the titanium surface after film depositions
-
Kim HW, Kim CW, Kim YS
- KMID: 2195909
- J Korean Acad Prosthodont.
- 2001 Feb;39(1):84-95.
Titanium is widely used in dentistry for its low density, high strength, fatigue resistance, corrosion resistance, and biocompatibility. But it has a tendency of surface damage under circumstance of friction... -
- CITED
-
- Close
- SHARE
-
- Close
