- A Study On The Tensile Strength Between Metal Denture Base And Relining Materials
-
Lee JS, Lim JH, Cho IH
- KMID: 2045078
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):1-11.
Relining and rebasing are essential for long-term success and oral health in removable prosthodontics. Major features of failures between metal base and relining resins are adhesive failure due to lack... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects Of Overdenture Retention On The Axial Load Of Implant In The Mandibular Implant-Supported Overdenture
-
Cho HW
- KMID: 2045086
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):98-107.
Three linear strain gauges (KFR-02N-120-C1-23, Kyowa, Japan) were placed around the abutment of implant fixture and the maximum axial loads on the mandibular implants supporting overdentures were registered in experimental... -
- CITED
-
- Close
- SHARE
-
- Close
- A Clinical Study On The Occurrence Of Food Impaction
-
Jung JH, Oh SC, Dong JK
- KMID: 2045082
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):50-58.
The purpose of this study was to investigate the causes of food impaction and to explore solutions as well. For this study, 39 patients with food impaction wee selected. 77... -
- CITED
-
- Close
- SHARE
-
- Close
- A Study On The Color Stability Of Porcelain For Porcelain Fused To Metal Crown
-
Ryu SY, Lim JH, Cho IH
- KMID: 2045084
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):73-84.
Dental porcelain should have adequate strength and similar esthetics as natural teeth. Recently esthetics has become a high priority in clinical dentistry. Thus the evaluation of color stability of dental... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effect Of Soldering Indices For The Distortion Of Split Cast
-
Lee DW, Lim JS, Jeong CM, Chon YC
- KMID: 2045080
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):26-37.
The purpose of this study was to investigate the effect that three resin indexing materials had on the distortion of split cast in the procedures of solder indexing and block... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effects Of Tooth Mobility And Design Of Direct Retainer On The Stress Of Supporting Tissues In Unilateral Distal Extension Removable Partial Denture
-
Jong YW, Jin TH
- KMID: 2045083
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):59-72.
This study was performed to investigate the effects of tooth mobility and design of the direct retainer on the stress of supporting tissues in distal extension removable partial denture. Tooth... -
- CITED
-
- Close
- SHARE
-
- Close
- A Study Of Surface Roughness Of Composite Resin
-
Park KH
- KMID: 2045087
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):108-115.
This study was designed to compare the effect of polishing on surface roughness of composite resin. We used Z100(3M) composite resin and placed the composite resin in the hole (4mm... -
- CITED
-
- Close
- SHARE
-
- Close
- Corrosion Characteristics Between Implant Fixture And Abutment Screw
-
Kee SJ, Kweon HS, Choe HC
- KMID: 2045085
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):85-97.
The purpose of this study was to compare the corrosion characteristics between implant fixture and two types of abutment screw; gold screw, titanium screw. The anodic polarization behavior, the galvanic... -
- CITED
-
- Close
- SHARE
-
- Close
- The Effects Of Thermocycling On The Bond Strength Between Cobalt-Chromium Alloy And Denture Base Resin
-
Lee SY, Vang MS
- KMID: 2045081
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):38-49.
The purpose of this study was to evaluate the effects of thermocycling on the shear bond strength of Co-Cr alloy to denture base resin. PMMA denture base resin such as... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative Histomorphometric Analysis Of Mandible And Iliac Bone On Bone Density
-
Yoo SJ, Chung MK
- KMID: 2045079
- J Korean Acad Prosthodont.
- 2000 Feb;38(1):12-25.
To demonstrate possible influences of general bone density on the mandible, histomorphometric analysis was carried out in mandibles and iliac bones and the correlation of the two bone densities was... -
- CITED
-
- Close
- SHARE
-
- Close
