- THE EFFECTS OF SURFACE TREATMENT AND THERMOCYCLING ON THE MICROLEAKAGE OF COMPOSITE RESIN CORES
-
Lim YC, Jin TH
- KMID: 2196025
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):255-263.
The purpose of this study was to compare the microleakage of the composite resin cores according to surface treatment, dentin bonding agents, and thermocycling. For this study, 120 extracted premolar... -
- CITED
-
- Close
- SHARE
-
- Close
- BOND STRENGTH BETWEEN COBALT-CHROMIUM ALLOY AND DENTURE BASE RESIN ACCORDING TO ADHESIVE PRIMERS
-
Park JI, Kwon JH, Lee HH, Cho HW
- KMID: 2196014
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):160-168.
This study evaluated the effects of four adhesive metal primers on the shear bond strength of a heat curing denture base resin(Lucitone 199) to cobalt-chromium alloy(Biosil-f). The adhesive metal primers... -
- CITED
-
- Close
- SHARE
-
- Close
- EFFECTS OF ELECTROLYTE CONCENTRATION AND ETCHING TIME ON SURFACE ROUGHNESS OF NI-CR-BE ALLOY
-
Heo JW, Jeon YC, Jeong CM, Lim CS
- KMID: 2196017
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):178-190.
The purpose of this study was to evaluate the surface roughness of Ni-Cr-Be alloy(Verabond ~, Aalba Dent Inc. USA) according to electrolyte concentration and etching time. Total of 150 metal... -
- CITED
-
- Close
- SHARE
-
- Close
- ANALYSIS OF OPTICAL TRANSMISSION CHARATERISTICS BY VISIBLE LIGHT INTO SHADE GUIDES
-
Choi KB, Park CW, Song CY, Ko SM
- KMID: 2196012
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):147-159.
The purpose of this study was the evaluation of spectral transmission of the commercial three shade guides and the relationship of hue, value, and chroma according to the transmission rate.... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON THE TENSILE STRENGTH OF REINFORCED VENEERING COMPOSITE RESINS FOR CROWN
-
Ahn SG, Kang DW
- KMID: 2196023
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):226-241.
Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and... -
- CITED
-
- Close
- SHARE
-
- Close
- MARGINAL DISCREPANCY AND RETENTION FORCE OF CONICAL TELESCOPE OUTER CROWN WITH CO-CR-TI ALLOY
-
Jung HC, Jeong CM, Jeon YC, Lim JS
- KMID: 2196021
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):214-225.
The purpose of this study was to investigate the effects of investing conditions on the marginal discrepancy of conical telescope outer crown with Co-Cr-Ti alloy(Dentitan) and to compare the marginal... -
- CITED
-
- Close
- SHARE
-
- Close
- WETTABILITY OF POLYVINYLSILOXANE IMPRESSION MATERIALS AND IMPROVED STONE MATERIALS
-
Cho LR, Chung KH, Kim KN
- KMID: 2196018
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):191-199.
Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wet tability of impression... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY OF CORE TYPE AND LUTING CEMENTS ON COMPLETE CAST CROWN RETENTION
-
Paek SH, Chang IT, Lee SH, Yang JH, Heo SJ
- KMID: 2196016
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):169-177.
The purpose of this study was to compare the retention of complete cast crown over amalgam cores, composite resin cores, and cast gold cores when cemented with three different luting... -
- CITED
-
- Close
- SHARE
-
- Close
- THE INFLUENCE OF SURFACE TREATMENTS ON THE SHEAR BOND STRENGTH OF RESIN CEMENTS TO IN-CERAM CORE
-
Yoon JT, Lee SH, Yang JH
- KMID: 2196010
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):129-146.
An increasing demand for esthetic restorations has led to the development of new ceramic systems. In-Ceram, a glass-infiltrated alumina ceramic has three to four times greater flexural strength than other... -
- CITED
-
- Close
- SHARE
-
- Close
- A STUDY ON THE ACCURACY OF THE IMPRESSION BODY ACCORDING TO MATERIALS AND FORMS OF THE INDIVIDUAL TOOTH TRAY
-
Ryu DW, Lim JH, Cho IH
- KMID: 2196024
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):242-254.
Accurate impression is very important to achieve desirable prosthesis and there are many factors in taking a good impression. For example, types of impression material, types of impression tray, impression... -
- CITED
-
- Close
- SHARE
-
- Close
- TENSILE STRENGTH OF LASER WELDED-TITANIUM AND GOLD ALLOYS
-
Song YG, Song KY, Ha IS
- KMID: 2196020
- J Korean Acad Prosthodont.
- 2000 Apr;38(2):200-213.
Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this... -
- CITED
-
- Close
- SHARE
-
- Close
