Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

11 results
Display

THE EFFECTS OF THERMAL CYCLING ON THE BOND STRENGTH OF SELF-CURING RESIN

Cho HW, Ha JI

  • KMID: 2196091
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):697-705.
The purpose of this study was to evaluate the effects of two metal adhesive primers on the shear bond strengths of self-curing resin to Ni-Cr alloy and the effects of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A COMPARISON OF ACCURACY BETWEEN FIXTURE IMPRESSION AND ABUTMENT IMPRESSION FOR DENTAL IMPLANTS

Choi HS, Yim SH, Cho IH

  • KMID: 2196089
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):662-673.
The purpose of this study was to compare the accuracy between fixture impression and abutment impression using strain gauges. The master model used in this study was a partially edentulous mandibular...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A STUDY ON THE DISTORTION OF THE COPINGS FOR CERAMOMETAL CROWNS DURING REPEATED FIRING

Lee KH, Chung HY, Lee SH, Yang JH

  • KMID: 2196092
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):706-718.
Ceramometal crowns are common restorations in fixed prosthodontics because of their casting accuracy, the high strength properties of the metal, and the cosmetic appearance of porcelain. However, deterioration of the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
IN VITRO EVALUATION OF PERIOTEST VALUES UNDER VARIOUS CONDITIONS OF PROSTHESES

Han JS

  • KMID: 2196097
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):793.
Periotest(Siemens, Germany) has been used to test mobility of the implants clinically, however the effects of target materials and connection methods on the PTVs(Periotest Values) have not been evaluated. Periotest...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
AN EVALUATION OF DYNAMIC FATIGUE CHARACTERISTICS OF DENTAL CERAMICS FOR ALL-CERAMIC CROWN

Yu HW, Bae TS, Song KY, Park CW

  • KMID: 2196096
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):781-792.
This study was performed to evaluate the dynamic fatigue characteristics of the dental ceramics for all-ceramic crown. A feldspathic porcelain of VMK68, glass ceramic of IPS-Empress, and glass infiltrated alumina...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THE EFFECT OF SCREW HOLE SEALING METHOD ON ABUTMENT SCREW LOOSENING IN DENTAL IMPLANT

Lim JB, Yim SH, Cho IH

  • KMID: 2196095
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):767-780.
One of the most common problems of implant prosthesis is the screw loosening of abutment screws. This brings on discomfort on mastication, inflammation in the peri-implant tissue due to poor...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF STRESS DISTRIBUTION IN ALL-CERAMIC CROWNS WITH VARIOUS FINISH LINE DESIGNS AND INCISAL REDUCTIONS UNDER DIFFERENT LOADING CONDITIONS

Koh ES, Lee SH, Yang JH, Chung HY

  • KMID: 2196094
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):742-766.
The purpose of this study was to determine the effect of finish line design, amount of incisal reduction, and loading condition on the stress distribution in anterior all-ceramic crowns. Three-dimensional finite...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF THE EFFECTS OF ALVEOLAR BONE LOSS ON STRESS DISTRIBUTION IN POST-RECONSTRUCTED TEETH

Lee KY, Chang IT

  • KMID: 2196090
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):674-696.
There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A DTUDY ON SURFACE ROUGHNESS OF COMPOSITE RESINS AFTER FINISHING AND POLISHING: an Atomic force Microscope study

Kim HS, Woo YH

  • KMID: 2196093
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):719-741.
This study was undertaken to compare by Atomic Force Microscope the effects of various finishing and polishing instruments on surface roughness of filling and veneering composite resins. Seven composite resins...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
THREE DIMENSIONAL FINITE ELEMENT ANALYSIS ON THE MINMUM CONTACT FRACTION OF BONE-IMPLANT INTERFACE

Jang KS, Kim YS, Kim CW

  • KMID: 2196087
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):627-646.
In order to find the degree of osseointegration at bone-implant interface of clinically successful implants, models including the 3.75mm wide, 10mm long screw type Branemarkimplant as a standard and cylinder,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
COMPARISON OF SHEAR BOND STRENGTH AND MARGINAL LEAKAGE OF RESIN MODIFIED GLASS IONOMER CEMENTS

Park HY, Oh NS, Lee KW, Lee HY

  • KMID: 2196088
  • J Korean Acad Prosthodont.
  • 1997 Dec;35(4):647-661.
The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it has been developed for luting of fixed restorations. To evaluate the bond strength and marginal...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr