- Influence of heating rate on the flexural strength of monolithic zirconia
-
Öztürk C, Çelik E
- KMID: 2455928
- J Adv Prosthodont.
- 2019 Aug;11(4):202-208.
- doi: 10.4047/jap.2019.11.4.202
PURPOSE: Fabrication of zirconia restorations with ideal mechanical properties in a short period is a great challenge for clinicians. The purpose of the study was to investigate the effect of... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of surface treatments on the bond strength of indirect resin composite to resin matrix ceramics
-
Çelik E, Şahin SC, Dede DO
- KMID: 2455931
- J Adv Prosthodont.
- 2019 Aug;11(4):223-231.
- doi: 10.4047/jap.2019.11.4.223
PURPOSE: The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different... -
- CITED
-
- Close
- SHARE
-
- Close
- Color alterations of a PMMA resin for fixed interim prostheses reinforced with silica nanoparticles
-
Kotanidis , Kontonasaki E, Koidis P
- KMID: 2455927
- J Adv Prosthodont.
- 2019 Aug;11(4):193-201.
- doi: 10.4047/jap.2019.11.4.193
PURPOSE: The aim of the present study was to evaluate the color changes of an autopolymerizing PMMA resin used for interim fixed restorations, reinforced with SiO2 nanoparticles. MATERIALS AND METHODS: Silica... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of different coloring liquids on the flexural strength of multilayered zirconia
-
Yu NK, Park MG
- KMID: 2455929
- J Adv Prosthodont.
- 2019 Aug;11(4):209-214.
- doi: 10.4047/jap.2019.11.4.209
PURPOSE: The purpose of this study was to evaluate the effect of two coloring liquids (aqueous and acid-based coloring liquids) and the position of multilayered zirconia on the flexural strength... -
- CITED
-
- Close
- SHARE
-
- Close
- Wear resistance of indirect composite resins used for provisional restorations supported by implants
-
Tsujimoto , Jurado C, Villalobos-Tinoco J, Barkmeier , Fischer N, Takamizawa T, Latta M, Miyazaki M
- KMID: 2455932
- J Adv Prosthodont.
- 2019 Aug;11(4):232-238.
- doi: 10.4047/jap.2019.11.4.232
PURPOSE: The aim of this study was to investigate simulated localized and generalized wear of indirect composite resins used for implant supported provisional restorations. MATERIALS AND METHODS: The study investigated ten... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of polishing systems on roughness and color change of two dental ceramics
-
Maciel LC, Silva CF, de Jesus R, ConcÃlio , Kano SC, Xible AA
- KMID: 2455930
- J Adv Prosthodont.
- 2019 Aug;11(4):215-222.
- doi: 10.4047/jap.2019.11.4.215
PURPOSE: To evaluate the polishing effect on roughness and color change of pressed and layering ceramics after immersion in coffee solution. MATERIALS AND METHODS: 88 ceramic discs (1.0 mm × 10.0... -
- CITED
-
- Close
- SHARE
-
- Close
