Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

9 results
Display

Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot

Choi KH, Son K, Lee DH, Lee KB

PURPOSE: Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of liners and primers on tensile bond strength between zirconia and resin-based luting agent

Jo EH, Huh YH, Ko KH, Park CJ, Cho LR

PURPOSE: The effect of silica-based glass-ceramic liners on the tensile bond strength between zirconia and resin-based luting agent was evaluated and compared with the effect of 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of relining materials on the flexural strength of relined thermoplastic denture base resins

Sun Y, Song SY, Lee KS, Park JH, Ryu JJ, Lee JY

PURPOSE: The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS: For shear bond...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Digital evaluation of axial displacement by implant-abutment connection type: An in vitro study

Kim SJ, Son K, Lee KB

PURPOSE: To measure axial displacement of different implant-abutment connection types and materials during screw tightening at the recommended torque by using a contact scanner for two-dimensional (2D) and three-dimensional (3D)...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strength of luting cements to fixed superstructure metal surfaces under various seating forces

Ozer F, Pak-Tunc E, Dagli NE, Ramachandran D, Sen D, Blatz MB

PURPOSE: In this study, the shear bond strengths (SBS) of luting cements to fixed superstructure metal surfaces under various seating forces were investigated. MATERIALS AND METHODS: Seven different cements [Polycarboxylate (PCC),...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique

Kang SY, Park JH, Kim JH, Kim WC

PURPOSE: To compare and analyze trueness and precision of provisional crowns made using stereolithography apparatus and subtractive technology. MATERIALS AND METHODS: Digital impressions were made using a master model and an...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Trueness and precision of scanning abutment impressions and stone models according to dental CAD/CAM evaluation standards

Jeon JH, Hwang SS, Kim JH, Kim WC

PURPOSE: The purpose of the present study was to compare scanning trueness and precision between an abutment impression and a stone model according to dental computer-aided design/computer-aided manufacturing (CAD/CAM) evaluation...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of marginal discrepancy of pressable ceramic veneer fabricated using CAD/CAM system: Additive and subtractive manufacturing

Kang SY, Lee HN, Kim JH, Kim WC

PURPOSE: The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS: The ceramic veneers for the abutment of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of the marginal and internal fit of a single crown fabricated based on a three-dimensional printed model

Jang Y, Sim JY, Park JK, Kim WC, Kim HY, Kim JH

PURPOSE: To evaluate the fit of a crown produced based on a 3D printed model and to investigate its clinical applicability. MATERIALS AND METHODS: A master die was fabricated with epoxy....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr