- Clinical outcome of immediately and early loaded implants with laser treated surface: a 3-year retrospective study
-
Leesungbok R, Seo JH, Cho SA
- KMID: 2409637
- J Adv Prosthodont.
- 2018 Apr;10(2):163-166.
- doi: 10.4047/jap.2018.10.2.163
PURPOSE: The marginal bone loss of implants with laser treated surface was investigated after six weeks of loading after implant installation to the mandible molar area. MATERIALS AND METHODS: A total... -
- CITED
-
- Close
- SHARE
-
- Close
- What is the changing frequency of diamond burs?
-
Emir F, Ayyildiz S, Sahin C
- KMID: 2409628
- J Adv Prosthodont.
- 2018 Apr;10(2):93-100.
- doi: 10.4047/jap.2018.10.2.93
PURPOSE: The purpose of this study was to determine the changing frequency of a diamond bur after multiple usages on 3 different surfaces. MATERIALS AND METHODS: Human premolar teeth (N =... -
- CITED
-
- Close
- SHARE
-
- Close
- Precision of the milled full-arch framework fabricated using pre-sintered soft alloy: A pilot study
-
Woo HW, Cho SA, Lee CH, Lee KB, Cho JH, Lee DH
- KMID: 2409632
- J Adv Prosthodont.
- 2018 Apr;10(2):128-131.
- doi: 10.4047/jap.2018.10.2.128
PURPOSE: This study aimed to evaluate the marginal discrepancy of full-arch frameworks in implant-supported prostheses fabricated using pre-sintered soft alloy (PSA). MATERIALS AND METHODS: Full-arch metal frameworks were fabricated on the... -
- CITED
-
- Close
- SHARE
-
- Close
- Three-dimensional finite element analysis of the splinted implant prosthesis in a reconstructed mandible
-
Heo KH, Lim YJ, Kim MJ, Kwon HB
- KMID: 2409634
- J Adv Prosthodont.
- 2018 Apr;10(2):138-146.
- doi: 10.4047/jap.2018.10.2.138
PURPOSE: The purpose of this study was to analyze the effects of the splinted implant prosthesis in a reconstructed mandible using three-dimensional finite element analysis. MATERIALS AND METHODS: Three-dimensional finite element... -
- CITED
-
- Close
- SHARE
-
- Close
- Repair bond strength of resin composite to bilayer dental ceramics
-
Ataol AS, Ergun G
- KMID: 2409629
- J Adv Prosthodont.
- 2018 Apr;10(2):101-112.
- doi: 10.4047/jap.2018.10.2.101
PURPOSE: The purpose of this study was to investigate the effect of various surface treatments (ST) on the shear bond strength of resin composite to three bilayer dental ceramics made... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of implant component fractures in external and internal type: A 12-year retrospective study
-
Yi Y, Koak JY, Kim SK, Lee SJ, Heo SJ
- KMID: 2409636
- J Adv Prosthodont.
- 2018 Apr;10(2):155-162.
- doi: 10.4047/jap.2018.10.2.155
PURPOSE: The aim of this study was to compare the fracture of implant component behavior of external and internal type of implants to suggest directions for successful implant treatment. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Analysis of osteogenic potential on 3mol% yttria-stabilized tetragonal zirconia polycrystals and two different niobium oxide containing zirconia ceramics
-
Hein AT, Cho YD, Jo YH, Kim DJ, Han JS
- KMID: 2409635
- J Adv Prosthodont.
- 2018 Apr;10(2):147-154.
- doi: 10.4047/jap.2018.10.2.147
PURPOSE: This study was performed to evaluate the osteogenic potential of 3mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP) and niobium oxide containing Y-TZPs with specific ratios, new (Y,Nb)-TZPs, namely YN4533 and... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of polymerization method and fabrication method on occlusal vertical dimension and occlusal contacts of complete-arch prosthesis
-
Lima AP, Vitti RP, Amaral M, Neves AC, da Silva Concilio LR
- KMID: 2409631
- J Adv Prosthodont.
- 2018 Apr;10(2):122-127.
- doi: 10.4047/jap.2018.10.2.122
PURPOSE: This study evaluated the dimensional stability of a complete-arch prosthesis processed by conventional method in water bath or microwave energy and polymerized by two different curing cycles. MATERIALS AND METHODS:... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of various polishing systems on surface roughness and phase transformation of monolithic zirconia
-
Caglar I, Ates SM, Yesil Duymus Z
- KMID: 2409633
- J Adv Prosthodont.
- 2018 Apr;10(2):132-137.
- doi: 10.4047/jap.2018.10.2.132
PURPOSE: The purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS: 100 disk shaped specimens... -
- CITED
-
- Close
- SHARE
-
- Close
- Hydroxyapatite-coated implant: Clinical prognosis assessment via a retrospective follow-up study for the average of 3 years
-
Jung JH, Kim SY, Yi YJ, Lee BK, Kim YK
- KMID: 2409627
- J Adv Prosthodont.
- 2018 Apr;10(2):85-92.
- doi: 10.4047/jap.2018.10.2.85
PURPOSE: This research evaluated clinical outcomes of two types of hydroxyapatite (HA)-coated implants: OT (Osstem TS III-HA, Osstem implant Co., Busan, Korea) and ZM (Zimmer TSV-HA, Zimmer dental, Carlsbad, USA). MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- Effects of incorporation of 2.5 and 5 wt% TiOâ‚‚ nanotubes on fracture toughness, flexural strength, and microhardness of denture base poly methyl methacrylate (PMMA)
-
Abdulrazzaq Naji S, Behroozibakhsh M, Jafarzadeh Kashi TS, Eslami H, Masaeli R, Mahgoli H, Tahriri M, Ghavvami Lahiji M, Rakhshan V
- KMID: 2409630
- J Adv Prosthodont.
- 2018 Apr;10(2):113-121.
- doi: 10.4047/jap.2018.10.2.113
PURPOSE: The aim of this preliminary study was to investigate, for the first time, the effects of addition of titania nanotubes (n-TiO2) to poly methyl methacrylate (PMMA) on mechanical properties... -
- CITED
-
- Close
- SHARE
-
- Close
- In-vitro performance and fracture strength of thin monolithic zirconia crowns
-
Weigl P, Sander A, Wu Y, Felber R, Lauer HC, Rosentritt M
- KMID: 2409626
- J Adv Prosthodont.
- 2018 Apr;10(2):79-84.
- doi: 10.4047/jap.2018.10.2.79
PURPOSE: All-ceramic restorations required extensive tooth preparation. The purpose of this in vitro study was to investigate a minimally invasive preparation and thickness of monolithic zirconia crowns, which would provide... -
- CITED
-
- Close
- SHARE
-
- Close
