Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

12 results
Display

Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system

Lee WS, Lee DH, Lee KB

PURPOSE: This study is to evaluate the internal fit of the crown manufactured by CAD/CAM milling method and 3D printing method. MATERIALS AND METHODS: The master model was fabricated with stainless...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of fit accuracy and torque maintenance of zirconia and titanium abutments for internal tri-channel and external-hex implant connections

Siadat H, Beyabanaki E, Mousavi N, Alikhasi M

PURPOSE: This in vitro study aimed to evaluate the effect of implant connection design (external vs. internal) on the fit discrepancy and torque loss of zirconia and titanium abutments. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Correlation between sagittal condylar guidance angles obtained using radiographic and protrusive occlusal record methods

Kwon OK, Yang SW, Kim JH

PURPOSE: This study compared the SCGAs measured in three types of radiographic images (panoramic, CBCT panoramic-section, and CBCT cross-section images) with values measured using the protrusive occlusal record. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of retention forces with various fabrication methods and materials in double crowns

Çelik Güven M, Tuna M, Bozdağ E, Öztürk G, Bayraktar

PURPOSE: The purpose of this study was to analyze the retention force changes and wear behaviours of double-crown systems over long-term use. MATERIALS AND METHODS: Ten groups, each consisting of six...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Analysis of crown size and morphology, and gingival shape in the maxillary anterior dentition in Korean young adults

Song JW, Leesungbok R, Park SJ, Chang SH, Ahn SJ, Lee SW

PURPOSE: The aim of this investigation was to analyze the dimensions of clinical crowns and to classify the crown and the gingival type in the anterior teeth in Korean young...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In vitro study of the fracture resistance of monolithic lithium disilicate, monolithic zirconia, and lithium disilicate pressed on zirconia for three-unit fixed dental prostheses

Choi JW, Kim SY, Bae JH, Bae EB, Huh JB

PURPOSE: The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of the material for preformed moulds on the polymerization temperature of resin materials for temporary FPDs

Pott PC, Schmitz-Wätjen H, Stiesch M, Eisenburger M

PURPOSE: Temperature increase of 5.5 ℃ can cause damage or necrosis of the pulp. Increasing temperature can be caused not only by mechanical factors, e.g. grinding, but also by exothermic...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of marginal and internal gaps in single and three-unit metal frameworks made by micro-stereolithography

Kim DY, Lee HN, Kim JH, Kim HY, Kim WC

PURPOSE: The purpose of this study is to compare single and three-unit metal frameworks that are produced by micro-stereolithography. MATERIALS AND METHODS: Silicone impressions of a selected molar and a premolar...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Ceramic molar crown reproducibility by digital workflow manufacturing: An in vitro study

Jeong ID, Kim WC, Park J, Kim CM, Kim JH

PURPOSE: This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. MATERIALS AND METHODS: A typodont model with a prepped...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of traditional and simplified methods for repairing CAD/CAM feldspathic ceramics

Carrabba M, Vichi A, Louca C, Ferrari M

PURPOSE: To evaluate the adhesion to CAD/CAM feldspathic blocks by failure analysis and shear bond strength test (SBSt) of different restorative systems and different surface treatments, for purpose of moderate...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Theoretical axial wall angulation for rotational resistance form in an experimental-fixed partial denture

Bowley JF, Kaye EK, Garcia RI

PURPOSE: The aim of this study was to determine the influence of long base lengths of a fixed partial denture (FPD) to rotational resistance with variation of vertical wall angulation. MATERIALS...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy of a separating foil impression using a novel polyolefin foil compared to a custom tray and a stock tray technique

Pastoret M, Krastl G, Bühler J, Weiger R, Zitzmann N

PURPOSE: To compare the dimensional accuracy of three impression techniques- a separating foil impression, a custom tray impression, and a stock tray impression. MATERIALS AND METHODS: A machined mandibular complete-arch metal...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr