- Erratum - Influence of various metal oxides on mechanical and physical properties of heat-cured polymethyl methacrylate denture base resins
-
Asar NV, Albayrak H, Korkmaz T, Turkyilmaz I
- KMID: 2176545
- J Adv Prosthodont.
- 2013 Nov;5(4):502-502.
- doi: 10.4047/jap.2013.5.4.502
The words "B" and "C" were mistakenly arranged in Fig. 1. It should be changed with each other. -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of coloring liquids on the translucency of zirconia framework
-
Tuncel I, Eroglu E, Sari T, Usumez A
- KMID: 2176537
- J Adv Prosthodont.
- 2013 Nov;5(4):448-451.
- doi: 10.4047/jap.2013.5.4.448
PURPOSE: Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro evaluation of resonance frequency analysis values to different implant contact ratio and stiffness of surrounding material
-
Kwak MS, Kim SG
- KMID: 2176534
- J Adv Prosthodont.
- 2013 Nov;5(4):428-433.
- doi: 10.4047/jap.2013.5.4.428
PURPOSE: The present study was aimed to evaluate the influence of implant contact ratio and stiffness of implant-surrounding materials on the resonance frequency analysis (RFA) values. MATERIALS AND METHODS: Seventy resin... -
- CITED
-
- Close
- SHARE
-
- Close
- An assessment of template-guided implant surgery in terms of accuracy and related factors
-
Lee JH, Park JM, Kim SM, Kim MJ, Lee JH, Kim MJ
- KMID: 2176536
- J Adv Prosthodont.
- 2013 Nov;5(4):440-447.
- doi: 10.4047/jap.2013.5.4.440
PURPOSE: Template-guided implant therapy has developed hand-in-hand with computed tomography (CT) to improve the accuracy of implant surgery and future prosthodontic treatment. In our present study, the accuracy and causative... -
- CITED
-
- Close
- SHARE
-
- Close
- The relationship of maxillary canines to the facial anatomical landmarks in a group of Thai people
-
Sinavarat , Anunmana C, Hossain S
- KMID: 2176521
- J Adv Prosthodont.
- 2013 Nov;5(4):369-373.
- doi: 10.4047/jap.2013.5.4.369
PURPOSE: The objective was to evaluate canine positions, intercanine tip width (ICTW) and width of distal surface of canine (WDC), related to facial landmarks including interalar width (IAW), intercommissural width... -
- CITED
-
- Close
- SHARE
-
- Close
- The impact of frenulum height on strains in maxillary denture bases
-
Cilingir A, Bilhan H, Baysal G, Sunbuloglu E, Bozdag E
- KMID: 2176531
- J Adv Prosthodont.
- 2013 Nov;5(4):409-415.
- doi: 10.4047/jap.2013.5.4.409
PURPOSE: The midline fracture of maxillary complete dentures is a frequently encountered complication. The purpose of this study was to assess the effect of frenulum height on midline strains of... -
- CITED
-
- Close
- SHARE
-
- Close
- Stress distribution of oval and circular fiber posts in amandibular premolar: a three-dimensional finite element analysis
-
Er O, Kilic K, Esim E, Aslan T, Kilinc HI, Yildirim S
- KMID: 2176535
- J Adv Prosthodont.
- 2013 Nov;5(4):434-439.
- doi: 10.4047/jap.2013.5.4.434
PURPOSE: The aim of the present study was to evaluate the effects of posts with different morphologies on stress distribution in an endodontically treated mandibular premolar by using finite element... -
- CITED
-
- Close
- SHARE
-
- Close
- Tensile bond strength of four denture resins to porcelain teeth with different surface treatment
-
El-Sheikh , Powers J
- KMID: 2176533
- J Adv Prosthodont.
- 2013 Nov;5(4):423-427.
- doi: 10.4047/jap.2013.5.4.423
PURPOSE: This study evaluated the bond strength between porcelain denture teeth (Bioblend 43D) and four different polymerized denture resins (Lucitone 199, Palapress, Acron MC, Triad) with and without a bonding... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro comparison of two different materials for the repair of urethan dimethacrylate denture bases
-
Cilingir A, Bilhan H, Geckili O, Sulun T, Bozdag E, Sunbuloglu E
- KMID: 2176528
- J Adv Prosthodont.
- 2013 Nov;5(4):396-401.
- doi: 10.4047/jap.2013.5.4.396
PURPOSE: The purpose of this in vitro study was to investigate the flexural properties of a recently introduced urethane dimethacrylate denture base material (Eclipse) after being repaired with two different... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of alumina and aluminium nitride coating by reactive magnetron sputtering on the resin bond strength to zirconia core
-
Kulunk T, Kulunk S, Baba S, Ozturk O, Danisman S, Savas S
- KMID: 2176525
- J Adv Prosthodont.
- 2013 Nov;5(4):382-387.
- doi: 10.4047/jap.2013.5.4.382
PURPOSE: Although several surface treatments have been recently investigated both under in vitro and in vivo conditions, controversy still exists regarding the selection of the most appropriate zirconia surface pre-treatment.... -
- CITED
-
- Close
- SHARE
-
- Close
- Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness
-
Ayyildiz S, Soylu EH, Ide S, Kilic S, Sipahi C, Piskin B, Gokce HS
- KMID: 2176541
- J Adv Prosthodont.
- 2013 Nov;5(4):471-478.
- doi: 10.4047/jap.2013.5.4.471
PURPOSE: The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal... -
- CITED
-
- Close
- SHARE
-
- Close
- Analysis of the characteristics of mouthguards that affect isokinetic muscular ability and anaerobic power
-
Jung JK, Chae WS, Lee KB
- KMID: 2176526
- J Adv Prosthodont.
- 2013 Nov;5(4):388-395.
- doi: 10.4047/jap.2013.5.4.388
PURPOSE: The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement
-
Tuncdemir , Yildirim C, Ozcan E, Polat S
- KMID: 2176539
- J Adv Prosthodont.
- 2013 Nov;5(4):457-463.
- doi: 10.4047/jap.2013.5.4.457
PURPOSE: The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement. MATERIALS AND METHODS: Fifty-five incisors extracted... -
- CITED
-
- Close
- SHARE
-
- Close
- Bond strength of veneer ceramic and zirconia cores with different surface modifications after microwave sintering
-
Saka M, Yuzugullu
- KMID: 2176543
- J Adv Prosthodont.
- 2013 Nov;5(4):485-493.
- doi: 10.4047/jap.2013.5.4.485
PURPOSE: To evaluate the effects of surface treatments on shear bond strength (SBS) between microwave and conventionally sintered zirconia core/veneers. MATERIALS AND METHODS: 96 disc shaped Noritake Alliance zirconia specimens were... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of alendronate on bone remodeling around implant in the rat
-
Park R, Kim JH, Choi H, Park YB, Jung HS, Moon HS
- KMID: 2176523
- J Adv Prosthodont.
- 2013 Nov;5(4):374-381.
- doi: 10.4047/jap.2013.5.4.374
PURPOSE: The purpose of this study was to evaluate the effect of alendronates on bone remodeling around titanium implant in the maxilla of rats. MATERIALS AND METHODS: The maxillary first molars... -
- CITED
-
- Close
- SHARE
-
- Close
- Gene expression of MC3T3-E1 osteoblastic cells on titanium and zirconia surface
-
Gong SH, Lee H, Pae A, Noh K, Shin YM, Lee JH, Woo YH
- KMID: 2176532
- J Adv Prosthodont.
- 2013 Nov;5(4):416-422.
- doi: 10.4047/jap.2013.5.4.416
PURPOSE: This study was performed to define attachment and growth behavior of osteoblast-like cells and evaluate the gene expression on zirconia compared to titanium. MATERIALS AND METHODS: MC3T3-E1 cells were cultured... -
- CITED
-
- Close
- SHARE
-
- Close
- Morphometric analysis of maxillary alveolar regions for immediate implantation
-
Park MS, Park YB, Choi H, Moon HS, Chung MK, Cha IH, Kim HJ, Han DH
- KMID: 2176544
- J Adv Prosthodont.
- 2013 Nov;5(4):494-501.
- doi: 10.4047/jap.2013.5.4.494
PURPOSE: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the... -
- CITED
-
- Close
- SHARE
-
- Close
- White light scanner-based repeatability of 3-dimensional digitizing of silicon rubber abutment teeth impressions
-
Jeon JH, Lee KT, Kim HY, Kim JH, Kim WC
- KMID: 2176538
- J Adv Prosthodont.
- 2013 Nov;5(4):452-456.
- doi: 10.4047/jap.2013.5.4.452
PURPOSE: The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences... -
- CITED
-
- Close
- SHARE
-
- Close
- Degree of conversion of two dual-cured resin cements light-irradiated through zirconia ceramic disks
-
Kim MJ, Kim KH, Kim YK, Kwon TY
- KMID: 2176540
- J Adv Prosthodont.
- 2013 Nov;5(4):464-470.
- doi: 10.4047/jap.2013.5.4.464
PURPOSE: The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of additional etching and curing mechanism of composite resin on the dentin bond strength
-
Lee IS, Son SA, Hur B, Kwon YH, Park JK
- KMID: 2176542
- J Adv Prosthodont.
- 2013 Nov;5(4):479-484.
- doi: 10.4047/jap.2013.5.4.479
PURPOSE: The aim of this study was to evaluate the effects of additional acid etching and curing mechanism (light-curing or self-curing) of a composite resin on the dentin bond strength... -
- CITED
-
- Close
- SHARE
-
- Close
