Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

20 results
Display

Evaluation on the efficacy and safety of calcium metaphosphate coated fixture

Cho IH, Lee JH, Song YG, Kim YM, Jeon SY

PURPOSE: The purpose of this study was to assess the difference in efficacy between calcium metaphosphate (CMP)-coated implant fixtures and conventional resorbable blasted media (RBM) processed implant fixtures. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Physical stability of arginine-glycine-aspartic acid peptide coated on anodized implants after installation

Huh JB, Lee JY, Jeon YC, Shin SW, Ahn JS, Ryu JJ

PURPOSE: The aim of this study was to evaluate the stability of arginine-glycine-aspartic acid (RGD) peptide coatings on implants by measuring the amount of peptide remaining after installation. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparative fracture strength analysis of Lava and Digident CAD/CAM zirconia ceramic crowns

Kwon TK, Pak HS, Yang JH, Han JS, Lee JB, Kim SH, Yeo IS

PURPOSE: All-ceramic crowns are subject to fracture during function. To minimize this common clinical complication, zirconium oxide has been used as the framework for all-ceramic crowns. The aim of this...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Maxillary cement retained implant supported monolithic zirconia prosthesis in a full mouth rehabilitation: a clinical report

Sadid-Zadeh R, Liu PR, Aponte-Wesson R, O'Neal SJ

This clinical report presents the reconstruction of a maxillary arch with a cement retained implant supported fixed prosthesis using a monolithic zirconia generated by CAD/CAM system on eight osseointegrated implants....
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Recruitment and enrollment in a randomized clinical trial of mandibular two-implant overdenture

Lee JY, Kim MS, Kim HY, Shin SW

PURPOSE: The purpose of this study was to evaluate the effectiveness of a promotion campaign for subject recruitment and selection, and reasons of withdrawal from a prospective clinical trial of...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of acrylamide incorporation on the thermal and physical properties of denture resins

Aydogan Ayaz E, Durkan R, Bagis B

PURPOSE: Polymethyl methacrylate (PMMA) is the most commonly used denture base material despite typically low in strength. The purpose of this study was to improve the physical properties of the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Mechanical and thermal properties of polyamide versus reinforced PMMA denture base materials

Soygun K, Bolayir G, Boztug A

PURPOSE: This in vitro study intended to investigate the mechanical and thermal characteristics of Valplast, and of polymethyl methacrylate denture base resin in which different esthetic fibers (E-glass, nylon 6...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of biofilm formation, and biocorrosion on denture base fractures

Sahin C, Ergin A, Ayyildiz S, Cosgun E, Uzun G

PURPOSE: The aim of this study was to investigate the destructive effects of biofilm formation and/or biocorrosive activity of 6 different oral microorganisms. MATERIALS AND METHODS: Three different heat polymerized acrylic...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of post surface conditioning before silanization on bond strength between fiber post and resin cement

Mosharraf , Ranjbarian P

PURPOSE: Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of solution temperature on the mechanical properties of dual-cure resin cements

Kang ES, Jeon YC, Jeong CM, Huh JB, Yun MJ, Kwon YH

PURPOSE: This study was to evaluate the effect of the solution temperature on the mechanical properties of dualcure resin cements. MATERIALS AND METHODS: For the study, five dual-cure resin cements were...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of silane activation on shear bond strength of fiber-reinforced composite post to resin cement

Kim HD, Lee JH, Ahn KM, Kim HS, Cha HS

PURPOSE: Among the surface treatment methods suggested to enhance the adhesion of resin cement to fiber-reinforced composite posts, conflicting results have been obtained with silanization. In this study, the effects...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface

Kursoglu P, Motro PF, Yurdaguven H

PURPOSE: To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS: Fifty-five ceramic blocks...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The influence of various core designs on stress distribution in the veneered zirconia crown: a finite element analysis study

Ha SR, Kim SH, Han JS, Yoo SH, Jeong SC, Lee JB, Yeo IS

PURPOSE: The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS: Three-dimensional finite element models, representing mandibular molars, comprising a prepared...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of span length on the fit of zirconia framework fabricated using CAD/CAM system

Lee JY, Choi SJ, Kim MS, Kim HY, Kim YS, Shin SW

PURPOSE: The purpose of this study was to evaluate the effect of the span length on the fit of zirconia framework fabricated using CAD/CAM system. MATERIALS AND METHODS: Abutments for single,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Color stability of thermochromic pigment in maxillofacial silicone

Kantola R, Lassila LV, Tolvanen M, Valittu PK

PURPOSE: Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency

Kim MJ, Ahn JS, Kim JH, Kim HY, Kim WC

PURPOSE: This study aimed to identify the effects of the sintering conditions of dental zirconia on the grain size and translucency. MATERIALS AND METHODS: Ten specimens of each of two commercial...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques

Kim KB, Kim JH, Kim WC, Kim HY, Kim JH

PURPOSE: One of the most important factors in evaluating the quality of fixed dental prostheses (FDPs) is their gap. The purpose of this study was to compare the marginal and...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Guided bone regeneration using demineralized allogenic bone matrix with calcium sulfate: case series

Kim YK, Lee JY, Kim SG, Lim SC

PURPOSE: The purpose of this case series was to evaluate the effect of guided bone regeneration using demineralized allogenic bone matrix with calcium sulfate. MATERIALS AND METHODS: Guided bone regeneration using...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of resin cements and primer on retentive force of zirconia copings bonded to zirconia abutments with insufficient retention

Kim SM, Yoon JY, Lee MH, Oh NS

PURPOSE: The purpose of this study was to investigate the effect of resin cements and primer on the retentive force of zirconia copings bonded to zirconia abutments with insufficient retention. MATERIALS...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Mouthguard use in Korean Taekwondo athletes - awareness and attitude

Lee JW, Heo CK, Kim SJ, Kim GT, Lee DW

PURPOSE: A survey was performed to identify the level of mouthguard use, awareness, wearability issues and attitude toward mouthguard among elite Korean Taewondo athletes. MATERIALS AND METHODS: Survey questionnaires were given...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr