- Abrasion of abutment screw coated with TiN
-
Jung SW, Son MK, Chung CH, Kim HJ
- KMID: 2045471
- J Adv Prosthodont.
- 2009 Jul;1(2):102-106.
- doi: 10.4047/jap.2009.1.2.102
STATEMENT OF PROBLEM: Screw loosening has been a common complication and still reported frequently. PURPOSE: The purpose of this study was to evaluate abrasion of the implant fixture and TiN... -
- CITED
-
- Close
- SHARE
-
- Close
- Implant surface treatments affect gene expression of Runx2, osteogenic key marker
-
Na Y, Heo SJ, Kim SK, Koak JY
- KMID: 2045469
- J Adv Prosthodont.
- 2009 Jul;1(2):91-96.
- doi: 10.4047/jap.2009.1.2.91
STATEMENT OF PROBLEM: The aim of this study was to study the effects of various surface treatments to a titanium surface on the expression of Runx2 in vitro. MATERIAL AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Sinking and fit of abutment of locking taper implant system
-
Moon SJ, Kim HJ, Son MK, Chung CH
- KMID: 2045470
- J Adv Prosthodont.
- 2009 Jul;1(2):97-101.
- doi: 10.4047/jap.2009.1.2.97
STATEMENT OF PROBLEM: Unlike screw-retention type, fixture-abutment retention in Locking taper connection depends on frictional force so it has possibility of abutment to sink. PURPOSE: In this study, Bicon(R) Implant... -
- CITED
-
- Close
- SHARE
-
- Close
- Histologic evaluation and removal torque analysis of nano- and microtreated titanium implants in the dogs
-
Ahn S, Vang MS, Yang HS, Park SW, Lim HP
- KMID: 2045467
- J Adv Prosthodont.
- 2009 Jul;1(2):75-84.
- doi: 10.4047/jap.2009.1.2.75
STATEMENT OF PROBLEM: A number of studies about the nano-treated surfaces of implants have been conducting along with micro-treated surfaces of implants. PURPOSE: The purpose of this study was to... -
- CITED
-
- Close
- SHARE
-
- Close
- Biomechanical evaluation of dental implants with different surfaces: Removal torque and resonance frequency analysis in rabbits
-
Koh JW, Yang JH, Han JS, Lee JB, Kim SH
- KMID: 2045472
- J Adv Prosthodont.
- 2009 Jul;1(2):107-112.
- doi: 10.4047/jap.2009.1.2.107
STATEMENT OF PROBLEM: Macroscopic and especially microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Dental implants with modified surfaces have shown stronger... -
- CITED
-
- Close
- SHARE
-
- Close
- Shear bond strength of composite resin to titanium according to various surface treatments
-
Lee SY, Vang MS, Yang HS, Park SW, Park HO, Lim HP
- KMID: 2045466
- J Adv Prosthodont.
- 2009 Jul;1(2):68-74.
- doi: 10.4047/jap.2009.1.2.68
STATEMENT OF PROBLEM: When veneering composite resin-metal restoration is prepared, the fact that bond strength between Ti and composite resin is relatively weak should be considered. PURPOSE: The purpose of... -
- CITED
-
- Close
- SHARE
-
- Close
- Dislodgement resistance of modified resin-bonded fixed partial dentures utilizing tooth undercuts: an in vitro study
-
Doh RM, Lee KW
- KMID: 2045468
- J Adv Prosthodont.
- 2009 Jul;1(2):85-90.
- doi: 10.4047/jap.2009.1.2.85
STATEMENT OF PROBLEM: Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in... -
- CITED
-
- Close
- SHARE
-
- Close
- Drying time of tray adhesive for adequate tensile bond strength between polyvinylsiloxane impression and tray resin material
-
Yi MH, Shim JS, Lee KW, Chung MK
- KMID: 2045465
- J Adv Prosthodont.
- 2009 Jul;1(2):63-67.
- doi: 10.4047/jap.2009.1.2.63
STATEMENT OF PROBLEM: Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in... -
- CITED
-
- Close
- SHARE
-
- Close
