- Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method
-
Jeong YG, Lee WS, Lee KB
- KMID: 2413494
- J Adv Prosthodont.
- 2018 Jun;10(3):245-251.
- doi: 10.4047/jap.2018.10.3.245
PURPOSE: To evaluate the accuracy of a model made using the computer-aided design/computer-aided manufacture (CAD/CAM) milling method and 3D printing method and to confirm its applicability as a work model... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparative study of new bone formation capability of zirconia bone graft material in rabbit calvarial
-
Kim IJ, Shin SY
- KMID: 2413484
- J Adv Prosthodont.
- 2018 Jun;10(3):167-176.
- doi: 10.4047/jap.2018.10.3.167
PURPOSE: The purpose of this study was to compare the new bone formation capability of zirconia with those of other synthetic bone grafts. MATERIALS AND METHODS: Twelve rabbits were used and... -
- CITED
-
- Close
- SHARE
-
- Close
- In vitro shear bond strength between fluorinated zirconia ceramic and resin cements
-
Tanış MC, Akay C, Akçaboy T, Şen M, Kavaklı P, Sapmaz K
- KMID: 2413489
- J Adv Prosthodont.
- 2018 Jun;10(3):205-210.
- doi: 10.4047/jap.2018.10.3.205
PURPOSE: The purpose of this study was to evaluate the efficiency of a gas-phase fluorination method under different fluorination periods through using two resin cements. MATERIALS AND METHODS: 84 zirconia specimens... -
- CITED
-
- Close
- SHARE
-
- Close
- Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas
-
Aranda Yus E, Cantarell , Miñarro Alonso A
- KMID: 2413493
- J Adv Prosthodont.
- 2018 Jun;10(3):236-244.
- doi: 10.4047/jap.2018.10.3.236
PURPOSE: To determine the discrepancy in monolithic zirconium dioxide crowns made with computer-aided design and computer-aided manufacturing (CAD/CAM) systems by comparing scans of silicone impressions and of master casts. MATERIALS AND... -
- CITED
-
- Close
- SHARE
-
- Close
- Stress distribution in premolars restored with inlays or onlays: 3D finite element analysis
-
Yang H, Park C, Shin JH, Yun KD, Lim HP, Park SW, Chung H
- KMID: 2413486
- J Adv Prosthodont.
- 2018 Jun;10(3):184-190.
- doi: 10.4047/jap.2018.10.3.184
PURPOSE: To analyze stress distribution in premolars restored with inlays or onlays using various materials. MATERIALS AND METHODS: Three-dimensional maxillary premolar models of abutments were designed to include the following: 1)... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the repeatability and matching accuracy between two identical intraoral spectrophotometers: an in vivo and in vitro study
-
Kim HK
- KMID: 2413495
- J Adv Prosthodont.
- 2018 Jun;10(3):252-258.
- doi: 10.4047/jap.2018.10.3.252
PURPOSE: The purpose of this study was to evaluate the repeatability and matching accuracy between two identical intraoral spectrophotometers. MATERIALS AND METHODS: The maxillary right central incisor, canine, and mandibular left... -
- CITED
-
- Close
- SHARE
-
- Close
- A retrospective clinical study of single short implants (less than 8 mm) in posterior edentulous areas
-
Kim SY, Ku JK, Kim HS, Yun PY, Kim YK
- KMID: 2413487
- J Adv Prosthodont.
- 2018 Jun;10(3):191-196.
- doi: 10.4047/jap.2018.10.3.191
PURPOSE: The goal of this study was to evaluate the clinical outcome of single short implants, less than 8 mm in length, placed in the posterior area. MATERIALS AND METHODS: A... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of undersizing and tapping on bone to implant contact and implant primary stability: A histomorphometric study on bovine ribs
-
Di Stefano DA, Perrotti V, Greco GB, Cappucci C, Arosio P, Piattelli , Iezzi G
- KMID: 2413492
- J Adv Prosthodont.
- 2018 Jun;10(3):227-235.
- doi: 10.4047/jap.2018.10.3.227
PURPOSE: Implant site preparation may be adjusted to achieve the maximum possible primary stability. The aim of this investigation was to study the relation among bone-to-implant contact at insertion, bone... -
- CITED
-
- Close
- SHARE
-
- Close
- Color comparison between non-vital and vital teeth
-
Greta DC, Colosi HA, Gasparik C, Dudea D
- KMID: 2413491
- J Adv Prosthodont.
- 2018 Jun;10(3):218-226.
- doi: 10.4047/jap.2018.10.3.218
PURPOSE: The aim of this study was to define a color space of non-vital teeth and to compare it with the color space of matched vital teeth, recorded in the... -
- CITED
-
- Close
- SHARE
-
- Close
- Microtensile bond strength of resin cement primer containing nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) to human dentin
-
Arjmand N, Boruziniat A, Zakeri M, Mohammadipour HS
- KMID: 2413485
- J Adv Prosthodont.
- 2018 Jun;10(3):177-183.
- doi: 10.4047/jap.2018.10.3.177
PURPOSE: The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin... -
- CITED
-
- Close
- SHARE
-
- Close
- Influence of scaling procedures on the integrity of titanium nitride coated CAD/CAM abutments
-
Gehrke P, Spanos E, Fischer C, Storck H, Tebbel F, Duddeck D
- KMID: 2413488
- J Adv Prosthodont.
- 2018 Jun;10(3):197-204.
- doi: 10.4047/jap.2018.10.3.197
PURPOSE: To determine the extent of treatment traces, the roughness depth, and the quantity of titanium nitride (TiN) removed from the surface of CAD/CAM abutments after treatment with various instruments. MATERIALS... -
- CITED
-
- Close
- SHARE
-
- Close
- The effect of sandblasting duration on the bond durability of dual-cure adhesive cement to CAD/CAM resin restoratives
-
Tekçe N, Tuncer S, Demirci M
- KMID: 2413490
- J Adv Prosthodont.
- 2018 Jun;10(3):211-217.
- doi: 10.4047/jap.2018.10.3.211
PURPOSE: To evaluate the effect of prolonged sandblasting on the bond durability of dual-cure adhesive resin cement to computer-aided design and computer-aided manufacturing (CAD/CAM) restoratives. MATERIALS AND METHODS: Nano-ceramic LAVA Ultimate... -
- CITED
-
- Close
- SHARE
-
- Close
