Skip Navigation
Skip to contents
Filter

ARTICLE TYPE

PUBLICATION DATE

11 results
Display

Effect of atmospheric plasma versus conventional surface treatments on the adhesion capability between self-adhesive resin cement and titanium surface

Seker E, Kilicarslan MA, Deniz ST, Mumcu E, Ozkan P

PURPOSE: The aim of this study was to evaluate the effects of atmospheric plasma (APL) versus conventional surface treatments on the adhesion of self-adhesive resin cement to Ti-6Al-4V alloy. MATERIALS AND...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of various veneering techniques on the marginal fit of zirconia copings

Torabi K, Vojdani M, Giti R, Taghva M, Pardis S

PURPOSE: This study aimed to evaluate the fit of zirconia ceramics before and after veneering, using 3 different veneering processes (layering, press-over, and CAD-on techniques). MATERIALS AND METHODS: Thirty standardized zirconia...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Effect of cement washout on loosening of abutment screws and vice versa in screw- and cement- retained implant-supported dental prosthesis

Kim SG, Chung CH, Son MK

PURPOSE: The purpose of this study was to examine the abutment screw stability of screw- and cement-retained implant-supported dental prosthesis (SCP) after simulated cement washout as well as the stability...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Evaluation and comparison of the marginal adaptation of two different substructure materials

Karaman T, Ulku SZ, Zengingul , Guven S, Eratilla V, Sumer E

PURPOSE: In this study, we aimed to evaluate the amount of marginal gap with two different substructure materials using identical margin preparations. MATERIALS AND METHODS: Twenty stainless steel models with a...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of IDS (immediate dentin sealing) on dentin bond strength under various thermocycling periods

Leesungbok R, Lee SM, Park SJ, Lee SW, Lee DY, Im BJ, Ahn SJ

PURPOSE: The purpose of this study was to find out the effect of immediate dentin sealing (IDS) on bond strength of ceramic restoration under various thermocycling periods with DBA (dentin...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Influence of preparation depths on the fracture load of customized zirconia abutments with titanium insert

Joo HS, Yang HS, Park SW, Kim HS, Yun KD, Ji MK, Lim HP

PURPOSE: This study evaluated the fracture load of customized zirconia abutments with titanium insert according to preparation depths, with or without 5-year artificial aging. MATERIALS AND METHODS: Thirty-six identical lithium disilicate...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin

Su N, Yue L, Liao Y, Liu W, Zhang H, Li X, Wang H, Shen J

PURPOSE: To measure the surface loss of dental restorative zirconia and the short-term bond strength between an indirect composite resin (ICR) and zirconia ceramic after various sandblasting processes. MATERIALS AND METHODS:...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Does matching relation exist between the length and the tilting angle of terminal implants in the all-on-four protocol? stress distributions by 3D finite element analysis

Li X, Cao Z, Qiu X, Tang Z, Gong L, Wang D

PURPOSE: To explore whether there is matching relation between the length and the tilting angle of terminal implants in the All-on-Four protocol by studying the effects of different implant configurations...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Implant-supported overdenture manufactured using CAD/CAM techniques to achieve horizontal path insertion between the primary and secondary structure: A clinical case report

Agustin-Panadero R, Penarrocha-Oltra D, Gomar-Vercher S, Ferreiroa , Penarrocha-Diago M

This report describes the case of an edentulous patient with an atrophic maxilla and severe class III malocclusion. Prosthetic rehabilitation was performed using CAD/CAM techniques for manufacturing an implant-supported overdenture...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of marginal bone loss and patient satisfaction in single and double-implant assisted mandibular overdenture by immediate loading

Tavakolizadeh S, Vafaee F, Khoshhal M, Ebrahimzadeh Z

PURPOSE: The purpose of this study was to compare the coronal bone level and patient satisfaction in 1-implant and 2-implant assisted mandibular overdentures. MATERIALS AND METHODS: Twenty patients who had maladaptive...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Impact of surface roughness of gypsum materials on adaptation of zirconia cores

Kim KB, Kim JH, Kim SH

PURPOSE: The present study investigated the influences of various gypsum materials on the precision of fit of CAD/CAM-fabricated prostheses and analyzed their correlation with surface roughness. MATERIALS AND METHODS: The master...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr