Skip Navigation
Skip to contents
Results by Year

View Wide

Filter

ARTICLE TYPE

PUBLICATION DATE

11 results
Display

A Study on the Retentive Force of Stud Attachments for Implant Overdenture

Song EJ, Bae EB, Choi JW, Bae JH, Kim JY, Lee SH

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Comparison of retentive force and wear pattern of Locator® and ADD-TOC attachments combined with CAD-CAM milled bar

Chae SK, Cho WT, Choi JW, Bae EB, Bae JH, Bae GH, Huh JB

PURPOSE The purpose of this study was to investigate changes in retention and wear pattern of Locator® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Mini-implant with additional retentive structure by using digital method

Hwang SH, Bae EB, Cho WT, Huh JB

Mini-implant has been reported as an alternative method to conventional diameter implants in the treatment of mandibular anterior region with narrow ridge. However, one-piece type mini-implant showed biological and technical...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Severe Temporal Hyper-Activated States Caused by Noise in Tinnitus and Hyperacusis with Normal Hearing

Bae EB, Lee JH

Lots of neuroimaging and animal studies have revealed that tinnitus and hyperacusis share the same patterns in the bottom up central auditory process. The aim was to identify the abnormal...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Removable Partial Denture Using Anterior Implant-Supported Fixed Prostheses for Edentulous Patients: A Case Report

Lee YJ, Bae EB, Jeong CM, Lee JJ, Kim JY, Huh JB

This case study was to report the possible increase in the denture retention and psychological relief using the implant-supported fixed prostheses in a completely edentulous patient. The implants were placed...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
In vitro study of the fracture resistance of monolithic lithium disilicate, monolithic zirconia, and lithium disilicate pressed on zirconia for three-unit fixed dental prostheses

Choi JW, Kim SY, Bae JH, Bae EB, Huh JB

PURPOSE: The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
3D printed interim immediate denture by using the occlusal plane digital transfer method of the POP BOW system in a patient planning to extract upper and lower residual teeth: a case report

Park DH, Bae EB, Jung IH, Jeong CM, Yun MJ, Huh JB, Lee SH

Interim immediate denture is fabricated to minimize the period of edentulousness after removal of the patient’s remaining teeth and before delivery of final prosthesis. In the case of using the...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Clinical evaluation of mandibular implant overdentures via Locator implant attachment and Locator bar attachment

Seo YH, Bae EB, Kim JW, Lee SH, Yun MJ, Jeong CM, Jeon YC, Huh JB

PURPOSE: The aim of this study was to evaluate the clinical findings and patient satisfaction on implant overdenture designed with Locator implant attachment or Locator bar attachment in mandibular edentulous...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
A prospective clinical of lithium disilicate pressed zirconia and monolithic zirconia in posterior implant-supported prostheses: A 24-month follow-up

Roh KW, Jeon YC, Jeong CM, Yun MJ, Huh JB, Lee SH, Yang DS, Bae EB

PURPOSE: The purpose of this study was to compare the clinical outcomes of lithium disilicate ceramic pressed zirconia prostheses and monolithic zirconia prostheses and to investigate the complications after two...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Clinical Evaluation of Lithium Disilicate Pressed Zirconia and Monolithic Zirconia in Posterior Implant-Supported Prostheses

Roh KW, Yang DS, Jeon YC, Jeong CM, Yun MJ, Lee SH, Choi JW, Lee JJ, Bae EB, Huh JB

PURPOSE: The purpose of this study was to compare the clinical outcomes of lithium disilicate pressed zirconia prostheses and monolithic zirconia prostheses, which are widely used as posterior implant restorations,...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close
Accuracy of several implant bite registration techniques: an in-vitro pilot study

Park DH, Park JM, Choi JW, Kang ES, Bae EB, Jeon YC, Jeong CM, Yun MJ, Huh JB

PURPOSE: This study evaluated the accuracies of different bite registration techniques for implant-fixed prostheses using three dimensional file analysis. MATERIALS AND METHODS: Implant fixtures were placed on the mandibular right second...
CITED
export Copy
Close
SHARE
Twitter Facebook
Close

Go to Top

Copyright © 2024 by Korean Association of Medical Journal Editors. All rights reserved.     E-mail: koreamed@kamje.or.kr