- Research on zirconium alloys with low elastic modulus and low magnetic susceptibility for improving bone resorption and susceptibility artifacts
-
Lee CY, Kim CS, Ko YM
- KMID: 2511983
- Korean J Dent Mater.
- 2020 Sep;47(3):143-156.
- doi: 10.14815/kjdm.2020.47.3.143
The objective of this study was to fabricate Zr-Cu alloys with low elastic modulus and low magnetic susceptibility for the use as the dental biomaterials. Metallic implants, such as stainless... -
- CITED
-
- Close
- SHARE
-
- Close
- Real time measurement of the transmittance change of composite during light curing
-
Oh HJ, Choi GW, Lee CH, Lim BS, Lee IB
- KMID: 2511978
- Korean J Dent Mater.
- 2020 Sep;47(3):119-130.
- doi: 10.14815/kjdm.2020.47.3.119
The purpose of this study was to measure the transmittance change of composites during light curing in real time according to different shades and thicknesses. An instrument using pulse width... -
- CITED
-
- Close
- SHARE
-
- Close
- Remineralization effect of experimental fluoride varnish with nano-sized hydroxyapatite and tricalcium phosphate
-
Shin Sj, Son JL, Oh S, Bae JM
- KMID: 2511980
- Korean J Dent Mater.
- 2020 Sep;47(3):131-142.
- doi: 10.14815/kjdm.2020.47.3.131
The purpose of this study was to evaluate the remineralization effect of experimental fluoride varnish mixed with nano-tricalcium phosphate (TCP) and nano-hydroxyapatite (HA) on bovine teeth under demineralization and remineralization... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of fabrication method of lithium disilicate crown on fitness
-
Choi SY, Kim S, Ji JH, Lee MH, Bae TS
- KMID: 2511985
- Korean J Dent Mater.
- 2020 Sep;47(3):157-168.
- doi: 10.14815/kjdm.2020.47.3.157
The purpose of this study was to evaluate the influence of fabrication methods of lithium disilicate reinforced glass-ceramic crown on marginal and internal fit. Lithium disilicate reinforced glass-ceramic crowns were... -
- CITED
-
- Close
- SHARE
-
- Close
