- Deep learning algorithms for identifying 79 dental implant types
-
Kong HJ, Yoo JY, Eom SH, Lee JH
- KMID: 2538517
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):196-203.
- doi: 10.14368/jdras.2022.38.4.196
Purpose: This study aimed to evaluate the accuracy and clinical usability of an identification model using deep learning for 79 dental implant types. Materials and Methods: A total of 45396... -
- CITED
-
- Close
- SHARE
-
- Close
- The survey on foreign body ingestion and aspiration during the dental prosthetic treatment
-
Bang GT, Jeon HS, Lee SK, Lee JI, Lee JH
- KMID: 2538520
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):222-232.
- doi: 10.14368/jdras.2022.38.4.222
Purpose: This study was to investigate the dentists’ experience and awareness of foreign body ingestion and aspiration during dental prosthetic treatment. Materials and Methods: A survey of 157 dentists working... -
- CITED
-
- Close
- SHARE
-
- Close
- Effect of storage condition of resin cement on shear bond strength of the orthodontic bracket
-
Yi SG, Kim JW, Park SH, Lee Y, Kim EH, Cho KM
- KMID: 2538516
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):185-195.
- doi: 10.14368/jdras.2022.38.4.189
Purpose: For orthodontic bracket bonding, light curing resin cement is widely used because the process is convenient, and it can be polymerized at the desired time. This study compared the... -
- CITED
-
- Close
- SHARE
-
- Close
- Fabrication of complete denture using CAD-based vertical dimension increase and monolithic disc: a case report
-
Kim H, Jang W, Park C, Yun KD, Lim HP, Park S
- KMID: 2538522
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):242-248.
- doi: 10.14368/jdras.2022.38.4.242
Recently, through the development of CAD/CAM technology, it is also being used for fabricating dentures. Compared to conventional methods, when digital dentures are fabricated, the fabrication process is facilitated, and... -
- CITED
-
- Close
- SHARE
-
- Close
- Evaluation of the dimensional change of 3D-printed complete denture after post-curing
-
Lee S, Kwak Y, Park E, Kim H
- KMID: 2538521
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):233-241.
- doi: 10.14368/jdras.2022.38.4.233
Purpose: The purpose of this study was to assess the dimensional change of 3D-printed dentures after post-curing. Materials and Methods: The upper and lower dentures were designed in Exocad DentalCAD software... -
- CITED
-
- Close
- SHARE
-
- Close
- Digital technique in diagnosis and restoration of maxillary anterior implant: a case report
-
Bang H, Jang W, Park C, Yun KD, Lim HP, Park S
- KMID: 2538523
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):249-256.
- doi: 10.14368/jdras.2022.38.4.249
The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed... -
- CITED
-
- Close
- SHARE
-
- Close
- Changes of bite force and dynamic functional occlusion analysis after occlusal stabilization splint therapy in sleep bruxism patients: a pilot study
-
Kim J, Choi Y, Song YB, Park W, Kim ST
- KMID: 2538518
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):204-212.
- doi: 10.14368/jdras.2022.38.4.204
Purpose: The aim of this study was to compare changes of bite force, occlusal contact area, and dynamic functional occlusion analysis after occlusal stabilization splint therapy during sleep for one... -
- CITED
-
- Close
- SHARE
-
- Close
- Efficacy of retreatment NiTi files for root canals filled with calcium silicate-based sealer
-
Hyun JY, Cho KM, Park SH, Lee Y, Lee YJ, Kim JW
- KMID: 2538519
- J Dent Rehabil Appl Sci.
- 2022 Dec;38(4):213-221.
- doi: 10.14368/jdras.2022.38.4.213
Purpose: The efficacy of the amount of sealer in the root canal and two retreatment NiTi file systems in removing filling materials. Materials and Methods: Extracted premolars with a single root... -
- CITED
-
- Close
- SHARE
-
- Close
